Available, delivery time: 1-3 days
Properties
| Ausführung: | lackiert |
|---|---|
| Verstellbereich in m: | 2,10 - 3,60 m |
Schrägstütze 2,10 - 3,60 m DC
Description
All versions with failure protection, accident proof.
Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks.
- Flexible head- and baseplate
- Headplate: 140 x 100 x 6 mm, with hole ø 20 mm
- G-hook: Ø 14 mm (no loosing)
Properties
| Ausführung: | lackiert |
|---|---|
| Verstellbereich in m: | 2,10 - 3,60 m |
|
Product Nr.
|
Product
|
Verstellbereich in m
|
|---|---|---|
|
25ST3
|
Schrägstütze 2,10 - 3,60 m DC |
2,10 - 3,60 m
|
|
25ST4
|
Schrägstütze 2,30 - 4,10 m DC |
2,3 - 4,1 m
|
|
25ST5
|
Schrägstütze 3,20 - 5,60 m DC |
3,20 - 5,60 m
|
- Verstellbereich in m
- 2,3 - 4,1 m
- Verstellbereich in m
- 3,20 - 5,60 m
Customers also viewed
All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)
AS-Fugenbänder aus Weich - PVC bestechen durch Ihre Vielzahl an guten Eigenschaften und durch hohe Wirtschaftlichkeit. Die spezielle Werkstoff-Mischung macht das Fugenband einsatzfähig im Sommer und Winter (Härte). AS-Fugenbänder eignen sich für alle normalen Beanspruchungen und decken somit den größten Teil der Beanspruchungen bei Bauwerken ab. Arbeitsfugenband bzw. Silofugenband einfach von Hand in den noch weichen Beton eindrücken.
to break off the end of the spacers after stripping the formwork. !not suitable for exposed concrete!
Galvanized formwork bracket: Inexpensive Versatile in use Can be attached with screws or nails (3 screws or 5 nails are required per side)
Lattenpfahl lackiert zur Absicherung auf der Baustelle. Pfahl mit 2 Bügel für z.B. Absperrlatten.
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline
Trench strut single spindle Head- and baseplate bent at the ends and with nailholes.Threaded spindle loose at the external tube.
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
One-piece formwork spacer tube with two sealing plugs, ensuring the specified wall thickness reliably. Spacer tube / cone system tested for watertightness up to 5 bar Fire resistance tested in accordance with EN 1363-1 Complies with the requirements of the W1 guideline