Properties

Ausführung:	lackiert
Verstellbereich in m:	2,3 - 4,1 m

Slanted props (DC)

Product number: 25ST4

Verstellbereich in m

2,0 - 3,60 m

2,3 - 4,1 m

3,1 - 5,7 m

Stk

Description

All versions with failure protection, accident proof.

Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks.

Flexible head- and baseplate
Headplate: 140 x 100 x 6 mm, with hole ø 20 mm
G-hook: Ø 14 mm (no loosing)

Properties

Ausführung:	lackiert
Verstellbereich in m:	2,3 - 4,1 m

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Verstellbereich in m
25ST3	Slanted props (DC)	2,0 - 3,60 m
25ST4	Slanted props (DC)	2,3 - 4,1 m
25ST5	Slanted props (DC)	3,1 - 5,7 m

Product Nr. : 25ST3

Slanted props (DC)

Price

Verstellbereich in m: 2,0 - 3,60 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 25ST4

Slanted props (DC)

Price

Verstellbereich in m: 2,3 - 4,1 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 25ST5

Slanted props (DC)

Price

Verstellbereich in m: 3,1 - 5,7 m

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Slanted props (DC)

All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)

Slanted props (DC)

Vitzthum-Baurohr Standard-Spiral

Concrete form round in spiral version. Other lengths on request!

Baustütze - Mini (DC)

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!

Tripod for props

Suppliable with a galvanised or lacquered surface.

SAM spacers; Exposed concrete already attached

Spacer system SAM for exposed concrete. (the concrete wall remains visible, there is no further cladding) In combination with 27 mm standard formwork panels, can be used quickly and easily. Packing units: up to a wall thickness of 30 cm 100 pieces / boxFrom a wall thickness of 31 cm 50 pieces / box Spacer for quick and economical shuttering of concrete and retaining walls. All special lengths (in cm increments) from 6 - 300 cm possible.

Tubes for cut outs

Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m

Deckenstütze Euro (DO) nach EN 1065

Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).

ZZ-batten

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.

Thumb nut

Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm