Properties

Ausführung:	lackiert
Verstellbereich in m:	2,10 - 3,60 m

Schrägstütze 2,10 - 3,60 m DC

Product number: 25ST3

Verstellbereich in m

2,10 - 3,60 m

2,3 - 4,1 m

3,20 - 5,60 m

Stk

Description

All versions with failure protection, accident proof.

Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks.

Flexible head- and baseplate
Headplate: 140 x 100 x 6 mm, with hole ø 20 mm
G-hook: Ø 14 mm (no loosing)

Properties

Ausführung:	lackiert
Verstellbereich in m:	2,10 - 3,60 m

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Verstellbereich in m
25ST3	Schrägstütze 2,10 - 3,60 m DC	2,10 - 3,60 m
25ST4	Schrägstütze 2,30 - 4,10 m DC	2,3 - 4,1 m
25ST5	Schrägstütze 3,20 - 5,60 m DC	3,20 - 5,60 m

Product Nr. : 25ST3

Schrägstütze 2,10 - 3,60 m DC

Price

Verstellbereich in m: 2,10 - 3,60 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 25ST4

Schrägstütze 2,30 - 4,10 m DC

Price

Verstellbereich in m: 2,3 - 4,1 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 25ST5

Schrägstütze 3,20 - 5,60 m DC

Price

Verstellbereich in m: 3,20 - 5,60 m

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Schrägstütze 3,20 - 5,60 m DC

All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)

Schrägstütze 2,30 - 4,10 m DC

Vitzthum-Baurohr Standard-Spiral

Concrete form round in spiral version. Other lengths on request!

Baustütze - Mini (DC)

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!

Deckenstütze Euro (DO) nach EN 1065

Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).

Thumb nut

Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm

ZZ-batten

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.

Lower-Prop head, galvanised

Suitable for props for hole Ø 40 mm. For wood formwork beams H 20

Thumb nut

Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm

Tripod for props

Suppliable with a galvanised or lacquered surface.