Properties

Ausführung:	fest

Rolling feet for gate-elements

Product number: 38AA10

Ausführung

drehbar

fest

Stk

Description

Rolling feet for gate element. To swing open the elements Design galvanized

Properties

Ausführung:	fest

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Ausführung
38AA10	Rolling feet for gate-elements	fest
38AA101	Rollenfuß für Torelement	drehbar

Product Nr. : 38AA10

Rolling feet for gate-elements

Price

Ausführung: fest

In Stock

Available, delivery time: 1-3 days

Product Nr. : 38AA101

Rollenfuß für Torelement

Price

Ausführung: drehbar

In Stock

Available on request

Customers also viewed

Bolzen- und Mattenschneider

For commercial reinforcing steel III + IV according to DIN 488 strength approx. 550 N / mm2 as well as prestressing steels and tempered steel wire up to a strength of 1570 N / mm2 (48 HRc) Please note the following when using the bolt cutters: Our bolt cutters are made of the best material. Make sure that the knives are placed at a right angle to the piece to be cut. Stronger structural steels must not be cut through at once. They must first be pressed in firmly, after which the bolt cutter is opened and pushed in again. This makes cutting easier and prevents the knives from breaking. After pressing in, the bolt cutter must not be levered, swiveled or inclined as this would lead to the cutting edges breaking out. The bolt cutters must never be used for hardened steels, concrete or steel nails. The service life of the bolt cutters is enormously extended by regularly tightening the screws.

RiveStop Ø 24 mm x 50 mm SS intern-Einschub

TYPE: Internal RiveStop SS with stainless steel cover plate and stainless steel rivet mandrel. Ideal for exposed concrete walls in combination with the stainless steel cover. Water pressure tight up to 5 bar. Certified by APPLUS. It is recommended to use RiveStop with stainless steel rivets (SS) for sealing with direct water contact and constant pressing water. STEP 1: Insert RiveStop into the opening to be sealed. STEP 2: Remove the mandrel. The rivet will expand until the opening is hermetically sealed.

Concrete mixer Atika Comet 130

Technical specifications: Description: Concrete mixer tilting drum type Type / engine: S 150 type S 1000 230V, 0.36 kW Mixing quantity: 110 lt

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths on request.

Mobile fence gz. heigth 120 cm

Mobile fences are robust, versatile fence-system for short run and effective hedge for building sites and events. The elements with circumferential frame can be connected with the hooks - loops system. The length of the Standard elements = 342 cm.

ZZ-Leiste Iso 35 mm Länge 2 Meter

ZZ ISO rebar spacer is a skidproofed and tilt secured spacer for the bottom reinforcement. The material is PVC free. There will be no shrinking as the concrete encloses the batten completly. Suitable for XPS, isolation or other soft surfaces. Due to the special form a linear interruption can be avoided.

Rebar spacers made of PE

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.

Rundfix (PVC-free)

PVC- free spacers for vertical reinforcement.