Formwork systems

Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no...

All versions with failure protection, accident proof. Props in different sizes and versions. Failure loads tested according to EN 1065. Produced and tested according to EN 1065 , with covered thread (DC). With failure protection and...

Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no...

Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m

Suppliable with a galvanised or lacquered surface.

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!

 Put the exposed concrete element on the spacer to get a clean exposed concrete surface after stripping the formwork.

Wire length = 7,5 m Usage length = 1,0 m

Anwendungsbereich: Möbel Innenausbau Wandschalungen, Verkleidungen

The both sided coat gives these panels high resistance against weather, liquids, etc. Structure : cross-banded construction Gluing : cook and weather-resistant Surface : phenolic coating edge sealed other forms and thicknesses on request

Suitable for props for hole Ø 40 mm. For wood formwork beams H 20

The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 /...