Properties

Ausführung:	verzinkt

Lower-Prop head, galvanised

Product number: 25SKB

Product request

Salutation

First name*

Last name*

Company name*

Phone number

E-Mail-Address*

Straße*

PLZ*

Ort*

Quantity*

Stk

Lower-Prop head, galvanised

Message

To continue, enter the characters shown above*

Fields marked with asterisks (*) are required.

(Product number: 25SKB)

Description

Suitable for props for hole Ø 40 mm.

For wood formwork beams H 20

Properties

Ausführung:	verzinkt

Zubehör

Holz-Schalungsträger H20

Long lifetime through high quality gluing Protection against damages through special beam end version Low weight Packaging: 50 / 100 pcs Dimension stable Other lengths on request

Deckenstütze Stabil (DC) nach EN 1065

Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.

Baustütze - Mini (DC)

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!

Deckenstütze Euro (DO) nach EN 1065

Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).

Deckenstützen Euro (DC) nach EN 1065

All versions with failure protection, accident proof. Props in different sizes and versions.Failure loads tested according to EN 1065. Produced and tested according to EN 1065, with covered thread (DC). With failure protection and accident proof. Threaded socket with additional bearing ring (slide ring). Headplate: class A 120 x 120 x 8 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.

Customers also viewed

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths on request.

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths on request.

Deckenstütze Euro (DO) nach EN 1065

Exposed concrete plugs for pressure cone

The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.

Slanted props (DC)

All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)

Rebar spacer CLOSED

Spacing strip to use on soft underground. Mill length: 200 cm. Other lenghts available. (PVC - free by request)

Exposed concrete plugs for pressure cone

Alu-Rollgerüst Breite 0,7 m

The professional alternative to hydraulic platforms Fully expandable and flexibly adaptable to your required height Highest stability thanks to aluminum construction in professional quality Easy to move thanks to large, steerable wheels with brakes and safe to park Easy to transport, store and move with minimal effort

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary. Degredable for 81% within 21 days.

Steel props STABIL (DC)