Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Ausführung: lackiert
Max. Belastung bei max. Höhe: 30 kN

Baustütze - Mini (DC)

Product number: 25S4
Verstellbereich in cm
Product request
Stk
Baustütze - Mini (DC)
Verstellbereich in cm: 55 - 80 cm

Fields marked with asterisks (*) are required.

(Product number: 25S4)

Description

With covered thread (DC).

  • Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm
  • G-hook: Ø 12 mm (no loosing) with bearing ring (loose)

Failure loads tested at concentric load, pay attention to security factor!

Properties

Ausführung: lackiert
Max. Belastung bei max. Höhe: 30 kN
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Verstellbereich in cm
25S4
 Baustütze - Mini (DC)
55 - 80 cm
25S41
 Baustütze - Mini (DC)
60 - 100 cm
25S5
 Baustütze - Mini (DC)
75 - 110 cm
25S6
 Baustütze - Mini (DC)
90 - 150 cm
25S7
 Baustütze - Mini (DC)
100 - 180 cm
Skip product gallery

Zubehör

Dreifuß-Ständer für Stützen
Dreifuß-Ständer für Stützen
Suppliable with a galvanised or lacquered surface.
Skip product gallery

Customers also viewed

Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Tripod for props
Tripod for props
Suppliable with a galvanised or lacquered surface.
Deckenstütze Euro (DO) nach EN 1065
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30
Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN
Grooved cone (VIBADISTANZ) Ø 22 mm
Grooved cone (VIBADISTANZ) Ø 22 mm
Grooved cone (Vibadistant) Ø 22 mm
Slanted props (DC)
Slanted props (DC)
All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)
Slanted props (DC)
Slanted props (DC)
All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)
This website uses cookies to ensure the best experience possible. More information...