Formwork systems

Slab edge shuttering and insulation in one . 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.

Three layer plywood weather-resistant glued Surface with melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!

Abstdanhalter System SAM für Sichtbeton (Sichtbeton Qualität) In Kombination mit 27mm Standard Schaltafeln, schnell und einfach anwendbar. Verpackungseinheiten: bis Wandstärke 30 cm 100 Stk. / Karton ab Wandstärke 35 cm 50 Stk. / Karton...

Material: Wood concrete slab Element - Length: 1600 mm, other lengths on request Material - Thickness: 10 or 14 mm Advantages: lost formwork doesn't have to be removed from the concrete easy mounting through screws or nails (light...

Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no...

Suppliable with a galvanised or lacquered surface.

Suitable for props for hole Ø 40 mm. For wood formwork beams H 20

Anwendungsbereich: Möbel Innenausbau Wandschalungen, Verkleidungen

The both sided coat gives these panels high resistance against weather, liquids, etc. Structure : cross-banded construction Gluing : cook and weather-resistant Surface : phenolic coating edge sealed other forms and thicknesses on request

Element size 250 x 60 cm Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong bonding effect through stong surface profiling. Great stability thanks to...

Concrete form for square pillars. Easy stripping through integrated division line.

Tube Plus guarantees a smooth surface. The inside of the shuttering tube is covered with a smooth film. Other lengths on request!