Properties

Stärke in mm:	25 mm

Sylomer-Polyurethanlager SR 55

Product number: 85SR005525

Stärke in mm

12 mm

25 mm

m²

Description

Sylomer impact sound bearing type SR 55

Area of application	Pressure load	Deformation
	Form factor dependent, the specified values apply to form factor q = 3
Static area of application (static loads)	up to 0,055 N/mm²	approx. 7 %
Dynamic area of application (static and dynamic loads)	up to 0,076 N/mm²	approx. 20%
Peak loads (rare, short-term loads)	up to 2,0 N/mm²	approx. 75%

Properties

Stärke in mm:	25 mm

Downloads "Sylomer-Polyurethanlager SR 55"

Download DatenblattSylomer_SCHALBAUVITZ-1491

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Stärke in mm
85SR005512	Sylomer-Polyurethanlager SR 55	12 mm
85SR005525	Sylomer-Polyurethanlager SR 55	25 mm

Product Nr. : 85SR005512

Sylomer-Polyurethanlager SR 55

Price

Stärke in mm: 12 mm

In Stock

Available, delivery time: 1-3 days

Product Nr. : 85SR005525

Sylomer-Polyurethanlager SR 55

Price

Stärke in mm: 25 mm

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Sylomer-Polyurethanlager SR 55

Sylomer impact sound bearing type SR 55 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,055 N/mm² approx. 7 % Dynamic area of application(static and dynamic loads) up to 0,076 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 2,0 N/mm² approx. 75%

Sylomer-Polyurethanlager SR110

Sylomer sound bearing bearing type SR110 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,110 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,160 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 3,0 N/mm² approx. 70%

Rundfix (PVC-free)

PVC- free spacers for vertical reinforcement.

VIBA-Sinterflex Dichtblech mit Montagefuss, mineralisch beidseitig vollbeschichtet

Unser VIBA-Sinterflex Fugenblech ist beidseitig mit einer patentierten „aktiven“ Spezialbeschichtung versehen. Diese ist nicht klebrig und hat keine Schutzfolie, die vor dem Betonieren entfernt werden muss. Die Beschichtung verbindet sich mit dem Beton durch eine natürliche Reaktion mit dem Umgebungsbeton und dichtet somit aktiv die abzudichtende Fuge ab. Die Fuge wird durch die Spezial- beschichtung aktiv zugesintert und dadurch immer dichter. Man spricht von einer aktiven Versinterung oder auch aktiven mineralisierenden Tiefenabdichtung. Die einzigartige Verbindung der aktiven VIBASinterflex Spezialbeschichtung zum Frischbeton verhindert zuverlässig eine Umwanderung des VIBA-Sinterflex Fugenblechsystems. Um sicher abzudichten genügt eine Betoneinbindung von nur 3 cm. Das VIBA-Sinterflex ist wasserreaktiv und dichtet somit Arbeits- und Sollrissfugen aktiv durch einen natürlichen betontechnlogischen Prozess ab. Wasserdrücke bis einschließlich 5 bar = 50 m WS können sicher abgedichtet werden!

Concrete screw - Multi-Monti

Verzinkte patentierte Betonschraube mit Sechskant und Flansch ETA-15/0784 und 15/0785 Zulassung- Zwei Einschraubtiefen — Ein echtes Plus für mehr Flexibilität und Wirtschaftlichkeit (alle Hinweise dazu auf der Verpackung) Neuer Schraubenkopf: Sechskantkopf mit angepresster Scheibe Kopfprägung MMS+ Erhöhung des Gewindeaußendurchmessers: Größere hinterschnittene Fläche durch das Gewinde im Beton Optimierte Tragfähigkeit im Beton Überarbeitete Funktionsspitze: Stärkere Verzahnung und größerer Außendurchmesser der Spitze Größerer Hinterschnitt Geringeres Verschleißverhalten der Funktionsspitze Weniger Verschleiß beim Einschrauben Hoher Montagekomfort – geringe Montagedrehmomente Für Befestigungen in Beton nach ETA-15/0784 und ETA-15/0785

Band saw UVB Z 500 S

Save time and effort at the building: with the band saw UVB Z 500 S for cutting gas-aereated concrete blocks and expanded clay - easy, quick and precise. The quick pay-back time makes it a profitable investment! Advantages: Torsionally rigid body. Practical transport position. Precise saw blade guidance. Saw table made of aluminium. Vulcanised rubber lining. Automatic limit stop. Quick changing of saw blade (also suitable for wood). On request with optional dust vacuum.

Evaporation protection Antisol - E

Version: Antisol - E Antisol -E is sprayed in a thin layer onto fresh concrete surfaces. The concrete surface is covered with a waterproof protective film and thus prevents premature drying out. Prevention of shrinkage cracks. Please note! Evaporation protection is sensitive to frost. Storage only above 0 ° C

Collecting tray 210 lt

210-liter painted spill tray with galvanized steel grating.

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

Injection resin - PROTECT

Injection resin - PROTECT Expansive polyurethane resin for crack and hose injection in wet areas. Consumption hose compression: ca. 1,5L per 10 m Approved for drinking water applications, low viscosity and permanently elastically, long processing time ca. 100 min by 20°C Packaging: 1 liter composite can = 750 mL component A and 250 mL component B Shipping weight 1,3 kg