Skip to main content Skip to search Skip to main navigation Skip to B2B platform navigation
Downloads "Sylomer-Polyurethanlager SR11"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Stärke in mm
85SR001112
Sylomer-Polyurethanlager SR11
12 mm
85SR001125
Sylomer-Polyurethanlager SR11
25 mm
Skip product gallery

Customers also viewed

Sylomer-Polyurethanlager SR11

Sylomer impact sound bearing type SR 11 - YELLOW Area of application Pressure load Deformation   Form factor dependent, the specified values apply to form factor q = 3   Static area of application(static loads) up to 0,011 N/mm² approx. 7% Dynamic area of application(static and dynamic loads) up to 0,016 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 0,5 N/mm² approx. 80%          

Sylomer-Polyurethanlager SR 55

Sylomer impact sound bearing type SR 55 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,055 N/mm² approx. 7 % Dynamic area of application(static and dynamic loads) up to 0,076 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 2,0 N/mm² approx. 75%

Schalungsbinder SAM 2

Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.

Kunststoffverschlussdeckel für Futterrohr

Sealing cap + formwork aid for WELLO and FASO lining tube reusable

Sylomer-Polyurethanlager SR 55

Sylomer impact sound bearing type SR 55 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,055 N/mm² approx. 7 % Dynamic area of application(static and dynamic loads) up to 0,076 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 2,0 N/mm² approx. 75%

Sylomer-Polyurethanlager SR 18

Sylomer sound bearing bearing type SR 18 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,018 N/mm² approx. 7 % Dynamic area of application(static and dynamic loads) up to 0,023 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 0,75 N/mm² approx. 80%

WELLO plastic lining tube with swelling tape

WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.

Sylomer-Polyurethanlager SR 28

Sylomer sound bearing bearing type SR 28 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,028 N/mm² approx. 7 % Dynamic area of application(static and dynamic loads) up to 0,037 N/mm² approx. 20 % Peak loads(rare, short-term loads) up to 1,0 N/mm² approx. 75 %

Kunststoffverschlussdeckel für Futterrohr

Sealing cap + formwork aid for WELLO and FASO lining tube reusable

Schalungsbinder SAM 2

Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.