Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Ausführung: lackiert
Größe in mm: 1500 x 1000 x 750 mm

Gitter-Stapelbehälter

Product number: 36B014
Ausführung
Größe in mm
Product request
Stk
Gitter-Stapelbehälter
Ausführung: lackiert , Größe in mm: 1500 x 1000 x 750 mm

Fields marked with asterisks (*) are required.

(Product number: 36B014)

Description

  • Stackable transport container, load capacity 1500 kg
  • Suitable for crane and forklift operation (4 lifting eyes above)
  • Side walls made of grid mesh 50 x 50 x 4 mm
  • Trapezoidal sheet metal floor

Versions in painted or galvanized.

Properties

Ausführung: lackiert
Größe in mm: 1500 x 1000 x 750 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Ausführung
Größe in mm
36B01
 Gitter-Stapelbehälter
lackiert
1200 x 800 x 750 mm
36B013
 Gitter-Stapelbehälter
lackiert
1500 x 800 x 750 mm
36B013V
 Gitter-Stapelbehälter
verzinkt
1500 x 800 x 750 mm
36B014
 Gitter-Stapelbehälter
lackiert
1500 x 1000 x 750 mm
36B01V
 Gitter-Stapelbehälter
verzinkt
1200 x 800 x 750 mm
36B03V
 Gitter-Stapelbehälter
verzinkt
1500 x 1000 x 750 mm
Skip product gallery

Customers also viewed

Lager- und Transportgestell
Lager- und Transportgestell
Easy storage of 25 or 30 fields and feet Ideal for rental at events and on construction sites Can be transported by forklift or crane
Tripod for props
Tripod for props
Suppliable with a galvanised or lacquered surface.
Deckenstütze Euro (DO) nach EN 1065
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Deckenstütze Euro (DO) nach EN 1065
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Gitter-Stapelbehälter
Gitter-Stapelbehälter
Stackable transport container, load capacity 1500 kg Suitable for crane and forklift operation (4 lifting eyes above) Side walls made of grid mesh 50 x 50 x 4 mm Trapezoidal sheet metal floor Versions in painted or galvanized.
Mauerkragen aus TPE - Themoplastischem Elastomer
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Gitter-Stapelbehälter
Gitter-Stapelbehälter
Stackable transport container, load capacity 1500 kg Suitable for crane and forklift operation (4 lifting eyes above) Side walls made of grid mesh 50 x 50 x 4 mm Trapezoidal sheet metal floor Versions in painted or galvanized.
Spacer Speedies ceiling SH
Spacer Speedies ceiling SH
Application: For concreting storey ceilings or concrete slabs as spacers for the lower reinforcement. Furthermore, the Speedies surface spacers can also be used very well in the precast concrete plant thanks to the pointed feet. With this design, the pointed feet achieve an optimal concrete flow and thereby reduce visibility in the concrete surface. Your advantage: Material polypropylene-PP Pressure-resistant / very high stability Ergonomic Transport-optimized (Euro pallet) Consumption approx. 1-1.5 pieces / m² patent pending MPA approved
Steel props STABIL (DC)
Steel props STABIL (DC)
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  
Deckenstütze Euro (DO) nach EN 1065
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
This website uses cookies to ensure the best experience possible. More information...