EURO lattice box pallet

Gitter-Stapelbehälter

Stackable transport container, load capacity 1500 kg Suitable for crane and forklift operation (4 lifting eyes above) Side walls made of grid mesh 50 x 50 x 4 mm Trapezoidal sheet metal floor Versions in painted or galvanized.

Gitter-Stapelbehälter

Stackable transport container, load capacity 1500 kg Suitable for crane and forklift operation (4 lifting eyes above) Side walls made of grid mesh 50 x 50 x 4 mm Trapezoidal sheet metal floor Versions in painted or galvanized.

Speedies Bar Spacer 20 mm

Application: For concreting floors or concrete slabs as spacers of the lower preservation. Furthermore, the Speedies surface spacers can also be used very well in the concrete precast plant due to the pointed feet. Your advantage: Material polypropylene PP Pressure resistant / Very high stability Ergonomic Transport optimized (europallet) Consumption approx. 1-1,5 pcs./m² Product is patent pending MPA-tested

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

VIBA-joint sheet roll ACTIVE - 160 mm unilaterally coated with Bentonit

VIBA thick tin Active is a galvanised, unilaterally full-flatly with active Bentonitcoated sealing metal with source effect. In both forking out a 7,5 cm wide high sticking push connection is raised. incl. 20 connection hangers, 4 push clips + 1,5 m of push connection (self-adhesive)

Stone cutting machine STEINADLER mod. SR 1000 H

The machine SR 1000 is a robust stone cutting machine for wet cutting. Provided with a diamond dividing disc it is used for cutting bricks, Ytong, concrete, lime sand brick, clinker and similar material. Robust, powerful and longliving due to its very stable construction. Technical data: engine: 7,5 kW 400 V 50 HZ<?xml:namespace prefix = "o" /> water pump: TB 16 0.07 kW 400 V 50 HZ dividing disc: Ø 900 or 1000 mm Bo 60 mm cut depth: max. 365/420 mm cut height: 650 mm feed: automatic with handrail Dimension: overall length 1150 mm overall width 860 mm overall height 2000 mm weight 415 kg

Full-wall stacking container galvanized

Full-wall stacking container galvanized. Stackable transport container, load capacity 1500 kg Suitable for crane and forklift operation (4 lifting eyes above) Strongly profiled walls guarantee a high load-bearing capacity Very stable, despite its low weight Trapezoidal bottom plate

Steel props STABIL (DC)

Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.

Spacer Speedies ceiling SH

Application: For concreting storey ceilings or concrete slabs as spacers for the lower reinforcement. Furthermore, the Speedies surface spacers can also be used very well in the precast concrete plant thanks to the pointed feet. With this design, the pointed feet achieve an optimal concrete flow and thereby reduce visibility in the concrete surface. Your advantage: Material polypropylene-PP Pressure-resistant / very high stability Ergonomic Transport-optimized (Euro pallet) Consumption approx. 1-1.5 pieces / m² patent pending MPA approved

Masonry tie channels Type HMS 25/15-D galv.

To fixtate outgoing masonry walls on concrete. The brick tie anchors can be used at any desired position across the total length of the brick tie channel.

EURO lattice box pallet

Description