Properties

Medium pipe Ø:	46 - 54 mm

Ringraumdichtung; Compakt Universaldichtung Ø 150 mm

Product number: 61LXN120152

Available on request

Medium pipe Ø

46 - 54 mm

56 - 66 mm

Price on request

Stk

Description

Core drilling Ø 150 mm
Weight approx. 1.2 kg
further dimensions on request

Properties

Medium pipe Ø:	46 - 54 mm

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Medium pipe Ø	Price	Action
61LXN120152	Ringraumdichtung; Compakt Universaldichtung Ø 150 mm	46 - 54 mm	Log in to see more information	Log in or Sign up
61LXN120153	Ringraumdichtung; Compakt Universaldichtung Ø 150 mm	56 - 66 mm	Log in to see more information	Log in or Sign up

Product Nr. : 61LXN120152

Ringraumdichtung; Compakt Universaldichtung Ø 150 mm

Price

Medium pipe Ø: 46 - 54 mm

In Stock

Available on request

Product Nr. : 61LXN120153

Ringraumdichtung; Compakt Universaldichtung Ø 150 mm

Price

Medium pipe Ø: 56 - 66 mm

In Stock

Available on request

Customers also viewed

Ringraumdichtung; Compakt Universaldichtung Ø 150 mm

Core drilling Ø 150 mm Weight approx. 1.2 kg further dimensions on request

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm

Super segment ring technology for cables and pipes; 12 segment rings with a diameter of 16 - 65 mm; simply tear off the segments until they fit split design, suitable for subsequent installation Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 25, 32, 40, 50 und 63 mm

Super segment ring technology for cables and pipes Open the pipe seal. Cut into the selected segment rings at the predetermined separation point with a sharp knife and tear off 5 segment rings with a diameter of 25 - 63 mm segment ring Pipe area Plug Ø 25 - 28 mm Nr. 1 Ø 32 mm Nr. 2 Ø 40 mm Nr. 3 Ø 50 mm Nr. 4 Ø 63 mm

Ringraumdichtung P-Cable Basic HRD 125

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Annular Seal - cable Ø 100 mm foldable

Annular seal - 4-fold cable Ø 100 mm MR Ø 6-40 mm Tested up to 10 m WS (1 bar) Hinged Annular seal for core drilling / wall sleeves Ø 100 mm Segment ring technology for 1 cable / tube Ø 25, 32 or 40 mm as well as 3 cables Ø 6-18 mm completly gastight and watertight Sealing width 40 mm, pressure-tight up to 1 bar profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug We expressly point out that if there are deviations from the information in the assembly instructions and if our products are used improperly, no guarantee is given for any consequential damage. MR = carrier pipe. Technical changes reserved.

Zwiebeldichtung Basic 1

Annular seal Basic 1 made of stainless steelStainless V2A Seal width 40 mm completely gastight and watertight built-in torque control EPDM rubber insert To split the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring approx. 10 mm to the left or right of the screw hole with a sharp knife.

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

Zwiebeldichtung Basic 1

Ringraumdichtung P-Cable Basic HRD Ø150

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Ringraumdichtung P-Cable Basic HRD Ø150

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)