Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Spacer Twistex PVC-free

Properties

Betondeckung in mm: 30 mm

Spacer Twistex PVC-free

Product number: 63IT30

Available, delivery time: 1-3 days

Betondeckung in mm

Price on request

Stück
Stk

Description

  • Load-bearing construction, also suitable for heavy reinforcement.
  • Shorter length than conventional bottom bar! Flexible and efficient installation thanks to a length of 80 cm.
  • Can also be used upside down on soft surfaces.
  • Test certificate on request.

Properties

Betondeckung in mm: 30 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Betondeckung in mm
Price
Action
63IT30
 Spacer Twistex PVC-free
30 mm
63IT35
 Spacer Twistex PVC-free
35 mm
63IT40
 Spacer Twistex PVC-free
40 mm
Skip product gallery

Ähnliche Artikel

Rebar spacer CLOSED

Spacing strip to use on soft underground. Mill length: 200 cm. Other lenghts available. (PVC - free by request)

Details
Rebar spacer OPEN

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. The openings allow a balanced distribution of concrete. Mill length 200 cm.  Other lengths on request.

Details
Rebar spacer made of PE

U-shaped bar spacer made of PE plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.

Details
Rebar spacer ZZ

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.

Details
Skip product gallery

Customers also viewed

Sylomer-Polyurethanlager SR110

Sylomer sound bearing bearing type SR110 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,110 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,160 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 3,0 N/mm² approx. 70%

spacers with nail holes made of plastic

spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening.

Joint tape outside

Vitzthum-water bars made of soft PVC bribe through many good  features and high profitability. The water bars are resistant against acid, alkali and putrefaction. Variety overview: Typ a (width) b c f 61F150 150 mm - - - 61F200 200 mm 80 mm 3,5 mm 20 mm 61F250 240 mm 90 mm 4,0 mm 25 mm 61A200 320 mm 110 mm 4,0 mm 25 mm                   Bitumen-resistant variety on request!

SAM-spacer normal

Spacer system SAM for normal concrete.(no exposed concrete surface - the walls should be plastered or coverd afterwards) Easy and fast application, in combination with 27 mm Standard formwork panels. Package units:to wall thickness 50 cm 100 pcs. / Packfrom wall thickness 51 cm 50 pcs. / Pack Other special lengths (in cm downgrading) from 6 - 300 cm possible.

Stone cutting machine STEINADLER model BY 760-32

The machines BY 300 and BY 760 are robust stone cutting machines for wet cutting. Provided with diamond dividing discs they are used for cutting bricks, Ytong, concrete, lime sand brick, clinker and similar material. Robust, powerful and longliving due to its very stable construction.   engine: 5,5 kW 400 V 50 HZ water pump: TB 16 0.07 kW 400 V 50 HZ dividing disc: Ø 750 mm Bo 60 mm cut depth: max. 325 mm cutting length: 600 mm height adjustment: with tension spring and seesaw weight: 285 kg

spacers with nail holes made of plastic

spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening.

Sylomer-Polyurethanlager SR110

Sylomer sound bearing bearing type SR110 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,110 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,160 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 3,0 N/mm² approx. 70%

This website uses cookies to ensure the best experience possible. More information...