Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Stärke in mm: 25 mm

Sylomer-Polyurethanlager SR110

Product number: 85SR011025
Stärke in mm
m²

Description

Sylomer sound bearing bearing type SR110

Area of application Pressure load

Deformation

Form factor dependent, the specified values apply to form factor q = 3

Static area of application
(static loads)

up to 0,110 N/mm²

approx. 10 %

Dynamic area of application
(static and dynamic loads)

up to 0,160 N/mm²

approx. 20%

Peak loads
(rare, short-term loads)

up to 3,0 N/mm²

approx. 70%

Properties

Stärke in mm: 25 mm
Downloads "Sylomer-Polyurethanlager SR110"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Stärke in mm
85SR011012
 Sylomer-Polyurethanlager SR110
12 mm
85SR011025
 Sylomer-Polyurethanlager SR110
25 mm
Skip product gallery

Ähnliche Artikel

Impact sound - bearing 10 x 100 mm
Impact sound - bearing 10 x 100 mm
The impact sound bearing is a PUR-bound rubber granulate forSupporting stairs and ceilings. Technical specifications: Volume weight                                                  820 kg / m³Basis weight                                                      820 g / m² / mmTear strength according to DIN 53571              1.2 N / mm²Elongation at break according to DIN 53571    90%Temperature resistance                                     -40 ° C - 90 ° CFire behavior according to DIN 4102 class       B2Recommended load                                          0.1 - 0.4 N / mm²Feather area                                                     approx. 0.7 - 1.5 mm
Skip product gallery

Customers also viewed

Sylomer-Polyurethanlager SR110
Sylomer-Polyurethanlager SR110
Sylomer sound bearing bearing type SR110 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,110 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,160 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 3,0 N/mm² approx. 70%
Sylomer-Polyurethanlager SR220
Sylomer-Polyurethanlager SR220
Sylomer sound bearing bearing type SR220 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,22 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,35 N/mm² approx. 20 % Peak loads(rare, short-term loads) up to 4,50 N/mm² approx. 65 %
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages:  Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible
Concrete screw - Multi-Monti
Concrete screw - Multi-Monti
Verzinkte patentierte Betonschraube mit Sechskant und Flansch ETA-15/0784 und 15/0785 Zulassung- Zwei Einschraubtiefen — Ein echtes Plus für mehr Flexibilität und Wirtschaftlichkeit (alle Hinweise dazu auf der Verpackung) Neuer Schraubenkopf: Sechskantkopf mit angepresster Scheibe Kopfprägung MMS+ Erhöhung des Gewindeaußendurchmessers: Größere hinterschnittene Fläche durch das Gewinde im Beton Optimierte Tragfähigkeit im Beton Überarbeitete Funktionsspitze: Stärkere Verzahnung und größerer Außendurchmesser der Spitze Größerer Hinterschnitt Geringeres Verschleißverhalten der Funktionsspitze Weniger Verschleiß beim Einschrauben Hoher Montagekomfort – geringe Montagedrehmomente Für Befestigungen in Beton nach ETA-15/0784 und ETA-15/0785
Evaporation protection Antisol - E
Evaporation protection Antisol - E
Version: Antisol - E Antisol -E is sprayed in a thin layer onto fresh concrete surfaces. The concrete surface is covered with a waterproof protective film and thus prevents premature drying out. Prevention of shrinkage cracks. Please note! Evaporation protection is sensitive to frost. Storage only above 0 ° C
Sylomer-Polyurethanlager SR220
Sylomer-Polyurethanlager SR220
Sylomer sound bearing bearing type SR220 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,22 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,35 N/mm² approx. 20 % Peak loads(rare, short-term loads) up to 4,50 N/mm² approx. 65 %
Rundfix (PVC-free)
Rundfix (PVC-free)
PVC- free spacers for vertical reinforcement.  
Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Band saw UVB Z 500 S
Band saw UVB Z 500 S
Save time and effort at the building: with the band saw UVB Z 500 S for cutting gas-aereated concrete blocks and expanded clay - easy, quick and precise. The quick pay-back time makes it a profitable investment! Advantages: Torsionally rigid body. Practical transport position. Precise saw blade guidance. Saw table made of aluminium. Vulcanised rubber lining. Automatic limit stop. Quick changing of saw blade (also suitable for wood). On request with optional dust vacuum.
Sylomer-Polyurethanlager SR 450
Sylomer-Polyurethanlager SR 450
Sylomer impact sound bearing SR 450 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application(static loads) up to 0,45 N/mm² approx. 10 % Dynamic area of application(static and dynamic loads) up to 0,70 N/mm² approx. 20% Peak loads(rare, short-term loads) up to 5,0 N/mm² approx. 60%          
This website uses cookies to ensure the best experience possible. More information...