Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Noppenfolie T8

Properties

Breite in m: 1,5 m
Länge in m: 20 m
Material: HDPE

Noppenfolie T8

Product number: 68N150

Available, delivery time: 1-3 days

Breite in m

Price on request

Quadratmeter
m²

Description

Sturdy and durable protection against mechanical damage.

Creates an air layer in front of the existing masonry with pimples (10 mm).

The basemant walls can breath and moisture isn'T stuck within the construction.

  • Material: HDPE,
    Fire behavior: B2 DIN 4102.

Properties

Breite in m: 1,5 m
Länge in m: 20 m
Material: HDPE
Downloads "Noppenfolie T8"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Breite in m
Price
Action
68N100
 Dimpled sheet
1,0 m
68N150
 Noppenfolie T8
1,5 m
68N200
 Noppenfolie T8
2,0 m
68N250
 Noppenfolie T8
2,5 m
68N300
 Noppenfolie T8
3,0 m
Skip product gallery

Zubehör

Cover profile for dimpled sheet

Sturdy and durable protection against mechanical damage. Creates an air layer in front of the existing masonry with pimples (10 mm). The basemant walls can breath and moisture isn'T stuck within the construction. Material: HDPE, Fire behavior: B2 DIN 4102.

Montagedübel für Noppenbahn Länge 55 mm

Montagedübel für Noppenbahn Länge 55 mm zur Befestigung auf XPS Dämmung (Dämmungen ab 60 mm). Im Lieferumfang (VPE = Karton) enthalten sind Torx Bits.

Skip product gallery

Ähnliche Artikel

Noppenfolie T20 Noppenhöhe 20 mm

Starke Noppenfolie für den Tief- und Tunnelbau. Breite 2,0 m, Rollenlänge 20 m Breite. Durch das große Volumen der 20 mm hohen Noppen garantiert die Noppenfolie T20 eine ununterbrochene Entwässerung selbst bei größten Wassermengen. Beim Einsatz im Tunnelbau und anderen Anwendungen, wenn sie mit den Noppen gegen den Stein oder die Betonwand verlegt wird. Material: HDPE (Polyethylen hoher Dichte) Gewicht: ca. 1000g / m2 , Folienstärke: ca. 1,0 mm Brandverhalten: B2 DIN 4102

Skip product gallery

Customers also viewed

Exposed conrete release agent VIBA-Saubär BIO

VIBA - Saubär is an environmentally friendly release agent emulsion based on renewable raw materials. It has been specially developed for producing high-quality exposed concrete surfaces in both precast and cast-in-place concrete construction. The special formulation ensures very bright, high-quality concrete surfaces. Application VIBA - Saubär is applied evenly, thinly and sparingly using a standard commercially available spray device. Puddles and accumulations of material should be avoided, as these can lead to a reduction in the quality of the concrete surface, particularly in recesses and along edges. After application, the emulsion forms a milky-white film, which disappears once the water component has evaporated. Concreting can then begin. The evaporation time depends on weather conditions (approx. 10–30 minutes at 20 °C and 60% relative humidity). Properties Based on renewable raw materials Excellent release properties Suitable for visually high-quality and bright concrete surfaces Environmentally friendly: FREE FROM solvents and mineral oils Low odour Ready to use Easy to spray

Kreuzklemmen für Erdungsband / - draht Kombination verzinkt

Cross clamps in different designs for grounding strap / wire combination

Exposed concrete cone for pressure cones 50 mm

High-class precisely tailored exposed concrete cone. After removing the pressure cones.  

Betontrennmittel VIBA-Trenn RAPID

Solvent-Free Universal Release Agent A solvent-free universal release agent suitable for all common types of formwork used in building construction, civil engineering, and precast concrete plants. • Biodegradable formwork release oil with 99.7% biodegradability within 5–6 days, tested according to OECD 301 C/F • Consumption: approx. 30–35 g/m², depending on the type of formwork • Frost-resistant • When used correctly, it does not adversely affect the subsequent treatment of the concrete surface, such as plastering, tiling, wallpapering, or painting.

Betontrennmittel VIBA-Trenn RAPID

Solvent-Free Universal Release Agent A solvent-free universal release agent suitable for all common types of formwork used in building construction, civil engineering, and precast concrete plants. • Biodegradable formwork release oil with 99.7% biodegradability within 5–6 days, tested according to OECD 301 C/F • Consumption: approx. 30–35 g/m², depending on the type of formwork • Frost-resistant • When used correctly, it does not adversely affect the subsequent treatment of the concrete surface, such as plastering, tiling, wallpapering, or painting.

Betontrennmittel VIBA-Trenn RAPID

Solvent-Free Universal Release Agent A solvent-free universal release agent suitable for all common types of formwork used in building construction, civil engineering, and precast concrete plants. • Biodegradable formwork release oil with 99.7% biodegradability within 5–6 days, tested according to OECD 301 C/F • Consumption: approx. 30–35 g/m², depending on the type of formwork • Frost-resistant • When used correctly, it does not adversely affect the subsequent treatment of the concrete surface, such as plastering, tiling, wallpapering, or painting.

This website uses cookies to ensure the best experience possible. More information...