Kompri - Fugendichtband BG1

• Homogeneous bond with concrete thanks to special coating • 2 end caps included in the scope of delivery • Gas-tight and watertight

For commercial reinforcing steel III + IV according to DIN 488 strength approx. 550 N / mm2 as well as prestressing steels and tempered steel wire up to a strength of 1570 N / mm2 (48 HRc) Please note the following when using the bolt cutters: Our bolt cutters are made of the best material. Make sure that the knives are placed at a right angle to the piece to be cut. Stronger structural steels must not be cut through at once. They must first be pressed in firmly, after which the bolt cutter is opened and pushed in again. This makes cutting easier and prevents the knives from breaking. After pressing in, the bolt cutter must not be levered, swiveled or inclined as this would lead to the cutting edges breaking out. The bolt cutters must never be used for hardened steels, concrete or steel nails. The service life of the bolt cutters is enormously extended by regularly tightening the screws.

The protective mats SUPER is bothsided coated with a white layer (Summer side) and a black layer (Winter side) Scope of application: Frost protection for Winter (enables concrete work to -5 Degree C without hardness decrease) Evaporation protection Protective covering Heat insulation

Bearing made of plastic to absorb moving forces of VIBA shear force dowel. The quill zone allows a longitudinal movement up to 20 mm. In the colours: yellow gray green blue black available.

Spacer system SAM for exposed concrete. (the concrete wall remains visible, there is no further cladding) In combination with 27 mm standard formwork panels, can be used quickly and easily. Packing units: up to a wall thickness of 30 cm 100 pieces / boxFrom a wall thickness of 31 cm 50 pieces / box Spacer for quick and economical shuttering of concrete and retaining walls. All special lengths (in cm increments) from 6 - 300 cm possible.

Made of fibre concrete with pimples for horizontal mats reinforcement. There are only a few support points due to nubby surface.

The distance stripes are situated between the upper and lower reinforcement panel as well as between the external and internal reinforcement wall. They don t sit on the formwork (no plastic feet) therefore, a proper exposed concrete can be arised. Packing units: big band at 1.000 pcs., band at 200 pcs., small band at 25 pcs.

Wooden triangular strips made of high quality softwood.

ECO Lost framework length: 1,25 m for ceiling formwork Material: Wood concrete slabElement - Length: 1250 mm, other lengths on requestMaterial - Thickness: 10 or 14 mm Advantages: lost formwork doesn't have to be removed from the concrete easy mounting through screws or nails (light nailing) time saving  optimum connection with concrete through 5 fixing strips by an element length of 1250 mm Fixing strips is made of the same material as VIBA shuttering board