Skip to main content Skip to search Skip to main navigation Skip to B2B platform navigation
Downloads "Rebar spacer CLOSED"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Betondeckung in mm
Price
Action
63I20A
Rebar spacer CLOSED
20 mm
63I25A
Rebar spacer CLOSED
25 mm
63I30A
Rebar spacer CLOSED
30 mm
63I40A
Rebar spacer CLOSED
40 mm
63I50A
Rebar spacer CLOSED
50 mm
63I35A
Rebar spacer CLOSED
35 mm
Skip product gallery

Ähnliche Artikel

Rebar spacer OPEN

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. The openings allow a balanced distribution of concrete. Mill length 200 cm.  Other lengths on request.

Rebar spacer made of PE

U-shaped bar spacer made of PE plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths available.

Drunterleiste Twistex PVC frei

Load-bearing construction, also suitable for heavy reinforcement. Shorter length than conventional bottom bar! Flexible and efficient installation thanks to a length of 80 cm. Can also be used upside down on soft surfaces. Test certificate on request.

Rebar spacer ZZ

Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.

Skip product gallery

Customers also viewed

Uni Futterrohr UFR mit Anspachtelflansch

The lining tube of the future! - For every type of wall! The Uni casing pipe (UFR) is a plastic casing pipe with an octagonal filler flange (flange made of ABS). When using plastic-modified bitumen coatings (load case in accordance with DIN 18195 Part 4), the external seal can be applied via the filler flange. The profile web sealing tapes included in the scope of delivery ensure a secure seal even with double / element walls and waterproof concrete.Longitudinally watertight up to 1 bar in waterproof concrete (white tub).

Binding wire MAX-TW898-EG Galvanized

Galvanized binding wire MAX-TW898-EG for RB 398 RB2, RB3 and RB5 series. Box of 50 rolls

Rebar spacer CLOSED

Spacing strip to use on soft underground. Mill length: 200 cm. Other lenghts available. (PVC - free by request)

VIBA Plex F Formwork Board 10

The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  

Ringraumdichtung P-Cable Basic HRD 80

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Bbinding wire bare MAX-TW1061T

Binding wire bare MAX-TW1061T for RB 441T.

Annular seal - cable Ø 100 mm solid

Annular seal - cable 5-fold Ø 100 mm MR 8-35 mm Tested up to 10 m WS (1 bar) Hinged annular seal for core drilling / wall sleeves Ø 100 mm Segment ring technology for 1 cable / pipe Ø 22 - 44 mm as well as 4 cables Ø 7-12 mm completely gastight and watertight Sealing width 40 mm, pressure-tight up to 1 bar U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug We expressly point out that if there are deviations from the information in the assembly instructions and if our products are used improperly, no guarantee is given for any consequential damage.