Properties

package piece:	true

Binding wire MAX-TW898-EG Galvanized

Product number: 56BM90516

Available, delivery time: 1-3 days

Price on request

Stk

Description

Galvanized binding wire MAX-TW898-EG for RB 398 RB2, RB3 and RB5 series.

Box of 50 rolls

Properties

package piece:	true

Customers also viewed

Bbinding wire bare MAX-TW1061T

Binding wire bare MAX-TW1061T for RB 441T.

Bindedraht blank MAX-TW898

Bindedraht blank MAX-TW898 für RB 398 RB2, RB3 und RB5 Serien

Bindedraht blank MAX-TW1525

Bindedraht blank MAX-TW1525 für Bindemaschine RB 655.

MAX Rebar Tying Tool - RB 443T Ø 20mm - 44 mm

MAX Rebar Trying Tool - RB 443T Ø 20 - 44 mm. The new generation of Re-Bar tying machine up to 20mm x 25mm with 1.0 mm wire. Advantages: 0.5 sec/tie which is 30% faster than RB441T. 5000 ties per charge 65 minutes full charge (50 minutes 80%) Scope of delivery: Battery JPL91450A ( 2 pcs.) Charging station JC925A Plastic case Applications: Precast Plants Foundations Road and Bridge Floor decking Floor heating Building floor

MAX Bindemaschine-Akku - RB 398S Ø 20 - 39 mm

Lieferumfang: Robuster Kunststoffkoffer, Ladegerät, 2 Stk. Lithium-Ion Akkus und 2 Rollen TJEP-Draht. 3500 Bindungen pro Aufladung. 10-Stufen Einstellung der Bindestärke 2 Kohlenbürstenfreier Drehmotor 120-160 Bindungen pro Drahtrolle Ergonomischer Handgriff 3 oder 2 Wicklungen möglich Einfaches Einlegen vom Draht

MAX Wire tying machine battery - RB 611T Ø 20 - 61 mm

Scope of delivery: Robust plastic case, charger, 2 pcs. Lithium-ion batteries and 2 rolls of TJEP wire. 5000 ties per charge. 10-step adjustment of the binding strength. 2 rotating motor without carbon brushes 240 ties per roll of wire 1.00 mm Ergonomic handle Double wire windings Higher strength, stronger stable bonds Easy insertion of the wire

Binding wire MAX-TW1061EG Galvanized

Bindedraht verzinkt MAX-TW1061EG für RB 441T.

Rebar spacers with sidewise recesses

U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement. Mill length 200 cm. Other lengths on request.

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

Flex 2000 sealing paste

Technical description: Storage: 2 years at 20 ° C Consistency: pasty, stable Processing temperature: + 5 ° C to + 35 ° C Consumption: approx. 1.6 kg per liter of cavity Heat resistance: + 50 ° C