Bindedraht blank MAX-TW1525
Product number:
56BM114395
Skip product gallery
Ähnliche Artikel
Binding wire MAX-TW898-EG Galvanized
Galvanized binding wire MAX-TW898-EG for RB 398 RB2, RB3 and RB5 series.
Box of 50 rolls
Log in to see more information
Skip product gallery
Customers also viewed
Bbinding wire bare MAX-TW1061T
Binding wire bare MAX-TW1061T for RB 441T.
Log in to see more information
Binding wire MAX-TW898-EG Galvanized
Galvanized binding wire MAX-TW898-EG for RB 398 RB2, RB3 and RB5 series.
Box of 50 rolls
Log in to see more information
Rebar spacers with sidewise recesses
U-shaped bar spacer made of plastic used for the efficient rearrangement of the reinforcement.
Mill length 200 cm.
Other lengths on request.
Log in to see more information
MAX Rebar Tying Tool - RB 443T Ø 20mm - 44 mm
MAX Rebar Trying Tool - RB 443T Ø 20 - 44 mm. The new generation of Re-Bar tying machine up to 20mm x 25mm with 1.0 mm wire.
Advantages:
0.5 sec/tie which is 30% faster than RB441T.
5000 ties per charge
65 minutes full charge (50 minutes 80%)
Scope of delivery:
Battery JPL91450A ( 2 pcs.)
Charging station JC925A
Plastic case
Applications:
Precast Plants
Foundations
Road and Bridge
Floor decking
Floor heating
Building floor
Release agent for exposed concrete – Ricon emulsion based on plant-based oils
Biological architectural concrete release agent Ricon (Art. No.: 52W3) is an environmentally friendly release agent emulsion based on renewable raw materials. It has been specially developed for producing high-quality architectural concrete surfaces in precast and in-situ concrete construction. The special formulation ensures very light-colored and high-quality concrete surfaces. After application, the emulsion forms a milky white film, which disappears after the water component has flashed off. Once this evaporation process is complete, concreting can begin. Depending on weather conditions, the flashing-off time is approx. 10–30 minutes at 20°C and 60% relative humidity.
Properties:
Based on renewable raw materials
Excellent release performance
For visually high-quality and light-colored concrete surfaces
Solvent-free and mineral oil-free
Low odor
Ready to use
Easy to spra
Log in to see more information
High-power injector 10 lt. oil-resistant
for fast coating of surfaces (formwork boards, etc.)
metal housing
Log in to see more information
Concrete screw - Multi-Monti
Verzinkte patentierte Betonschraube mit Sechskant und Flansch ETA-15/0784 und 15/0785 Zulassung- Zwei Einschraubtiefen — Ein echtes Plus für mehr Flexibilität und Wirtschaftlichkeit (alle Hinweise dazu auf der Verpackung)
Neuer Schraubenkopf:
Sechskantkopf mit angepresster Scheibe
Kopfprägung MMS+
Erhöhung des Gewindeaußendurchmessers:
Größere hinterschnittene Fläche durch das Gewinde im Beton
Optimierte Tragfähigkeit im Beton
Überarbeitete Funktionsspitze:
Stärkere Verzahnung und größerer Außendurchmesser der Spitze
Größerer Hinterschnitt
Geringeres Verschleißverhalten der Funktionsspitze
Weniger Verschleiß beim Einschrauben
Hoher Montagekomfort – geringe Montagedrehmomente
Für Befestigungen in Beton nach ETA-15/0784 und ETA-15/0785
Log in to see more information
Concrete spacer with plastic clamps
Stable exposed concrete spacer with 4-point batch used for wall- and ceilings-reinforcement
Log in to see more information