Properties

Ausführung:	lackiert
Verstellbereich in m:	2,0 - 3,60 m

Slanted props (DC)

Product number: 25ST3

Verstellbereich in m

2,0 - 3,60 m

2,3 - 4,1 m

3,1 - 5,7 m

Product request

Salutation

First name*

Last name*

Company name*

Phone number

E-Mail-Address*

Message

Quantity*

Stk

Slanted props (DC)

Verstellbereich in m: 2,0 - 3,60 m

Message

Fields marked with asterisks (*) are required.

(Product number: 25ST3)

Description

All versions with failure protection, accident proof.

Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks.

Flexible head- and baseplate
Headplate: 140 x 100 x 6 mm, with hole ø 20 mm
G-hook: Ø 14 mm (no loosing)

Properties

Ausführung:	lackiert
Verstellbereich in m:	2,0 - 3,60 m

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Verstellbereich in m
25ST3	Slanted props (DC)	2,0 - 3,60 m
25ST4	Slanted props (DC)	2,3 - 4,1 m
25ST5	Slanted props (DC)	3,1 - 5,7 m

Product Nr. : 25ST3

Slanted props (DC)

Price

Verstellbereich in m: 2,0 - 3,60 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 25ST4

Slanted props (DC)

Price

Verstellbereich in m: 2,3 - 4,1 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 25ST5

Slanted props (DC)

Price

Verstellbereich in m: 3,1 - 5,7 m

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Slanted props (DC)

All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)

Vitzthum-Baurohr Standard-Spiral

Concrete form round in spiral version. Other lengths on request!

Slanted props (DC)

Thumb nut

Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm

Thumb nut

Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm

Thumb nut

Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm

Deckenstütze Euro (DO) nach EN 1065

Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).

Lower-Prop head, galvanised

Suitable for props for hole Ø 40 mm. For wood formwork beams H 20

Tubes for cut outs

Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m

Baustütze - Mini (DC)

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!