Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Länge in mm: 100 mm
ø in mm: 13 mm

Schraub-Injektionspacker

Product number: 61VL13100

Available, delivery time: 1-3 days

Länge in mm
ø in mm

Price on request

Stk

Description

Hole in 45° angle

Dimension incl. nipple

Properties

Länge in mm: 100 mm
ø in mm: 13 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Länge in mm
ø in mm
Price
Action
61VL10070
 Schraub-Injektionspacker
70 mm
10 mm
61VL10100
 Schraub-Injektionspacker
100 mm
10 mm
61VL13075
 Schraub-Injektionspacker
80 mm
13 mm
61VL13100
 Schraub-Injektionspacker
100 mm
13 mm
61VL13170
 Schraub-Injektionspacker
170 mm
13 mm
Skip product gallery

Customers also viewed

Schraub-Injektionspacker
Schraub-Injektionspacker
Hole in 45° angle Dimension incl. nipple
Schraub-Injektionspacker
Schraub-Injektionspacker
Hole in 45° angle Dimension incl. nipple
Schraub-Injektionspacker
Schraub-Injektionspacker
Hole in 45° angle Dimension incl. nipple
Kunststoff-Futterrohr WELLO mit Quellband
Kunststoff-Futterrohr WELLO mit Quellband
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Injection resin - PROTECT
Injection resin - PROTECT
Injection resin - PROTECT Expansive polyurethane resin for crack and hose injection in wet areas. Consumption hose compression: ca. 1,5L per 10 m Approved for drinking water applications, low viscosity and permanently elastically, long processing time ca. 100 min by 20°C Packaging: 1 liter composite can = 750 mL component A and 250 mL component B Shipping weight 1,3 kg
Exposed concrete plugs for pressure cone
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
MAX Wire tying machine battery - RB 611T Ø 20 - 61 mm
MAX Wire tying machine battery - RB 611T Ø 20 - 61 mm
Scope of delivery: Robust plastic case, charger, 2 pcs. Lithium-ion batteries and 2 rolls of TJEP wire. 5000 ties per charge. 10-step adjustment of the binding strength. 2 rotating motor without carbon brushes 240 ties per roll of wire 1.00 mm Ergonomic handle Double wire windings Higher strength, stronger stable bonds Easy insertion of the wire
Pressure cone standard (PVC-free)
Pressure cone standard (PVC-free)
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.
T-profile strips PVC
T-profile strips PVC
For covering formwork joints.
VIBA-punched steel strip 50 x 2,0 mm hole Ø 20/22 mm
VIBA-punched steel strip 50 x 2,0 mm hole Ø 20/22 mm
Horizontal frame-elements for formworks of fundaments. Anchoring:On top with anchor rod Ø 15,0 mm and "super" nut.On base with VIBA-foundation tensioner and VIBA-punched steel strip.Wall thicknesses within a 5 cm grid can be produced. Load:punched steel strip max. 12 kNpunched steel strip length = wall thickness + 50 cm
This website uses cookies to ensure the best experience possible. More information...