Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Dichtbreite: 40 mm
ø in mm: 100 mm

Blind plug compact V2A Ø 50 - 250 mm

Product number: 61LXN1000

Available, delivery time: 1-3 days

Dichtbreite
ø in mm

Price on request

Stk

Description

Gas and water tight sealing for drill holes, tubes, etc. 

  • Rubber insert made of EPDM, press plates made of stainless steel V2A
  • completly gastight and watertight
  • pressing water 2.5 bar (30 m WS)
  • radon tight
  • KTW/W270 drinking water - quality

Properties

Dichtbreite: 40 mm
ø in mm: 100 mm
Downloads "Blind plug compact V2A Ø 50 - 250 mm"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Dichtbreite
ø in mm
Price
Action
61LXN1000
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
100 mm
61LXN1001
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
80 mm
61LXN1002
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
125 mm
61LXN1003
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
150 mm
61LXN1004
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
200 mm
61LXN1005
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
250 mm
Skip product gallery

Ähnliche Artikel

Blindstopfen HRD, Dichtbreite 30 mm
Blindstopfen HRD, Dichtbreite 30 mm
For non-pressing water 1.5 bar Rubber insert made of EPDM, press plates made of stainless steel V2A completly gastight and watertight NBR rubber insert on request
Details
Skip product gallery

Customers also viewed

Blind plug compact V2A Ø 50 - 250 mm
Blind plug compact V2A Ø 50 - 250 mm
Gas and water tight sealing for drill holes, tubes, etc.  Rubber insert made of EPDM, press plates made of stainless steel V2A completly gastight and watertight pressing water 2.5 bar (30 m WS) radon tight KTW/W270 drinking water - quality
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung P-Cable Basic HRD Ø100
Ringraumdichtung P-Cable Basic HRD Ø100
The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
Kunststoff-Futterrohr WELLO mit Quellband
Kunststoff-Futterrohr WELLO mit Quellband
WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Annular seal - cable Ø 100 mm solid
Annular seal - cable Ø 100 mm solid
Annular seal - cable 5-fold Ø 100 mm MR 8-35 mm Tested up to 10 m WS (1 bar) Hinged annular seal for core drilling / wall sleeves Ø 100 mm Segment ring technology for 1 cable / pipe Ø 22 - 44 mm as well as 4 cables Ø 7-12 mm completely gastight and watertight Sealing width 40 mm, pressure-tight up to 1 bar U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug We expressly point out that if there are deviations from the information in the assembly instructions and if our products are used improperly, no guarantee is given for any consequential damage.
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm
Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.
Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm
Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm
Super segment ring technology for cables and pipes; 12 segment rings with a diameter of 16 - 65 mm; simply tear off the segments until they fit split design, suitable for subsequent installation Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug
Zwiebeldichtung Basic 1
Zwiebeldichtung Basic 1
Annular seal Basic 1 made of stainless steelStainless V2A Seal width 40 mm completely gastight and watertight built-in torque control EPDM rubber insert To split the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring approx. 10 mm to the left or right of the screw hole with a sharp knife.
Ringraumdichtung P-Cable Basic HRD Ø100
Ringraumdichtung P-Cable Basic HRD Ø100
The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)
This website uses cookies to ensure the best experience possible. More information...