Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Blind plug compact V2A Ø 50 - 250 mm
Blind plug compact V2A Ø 50 - 250 mm

Properties

Dichtbreite: 40 mm
ø in mm: 80 mm

Blind plug compact V2A Ø 50 - 250 mm

Product number: 61LXN1001

Available, delivery time: 1-3 days

ø in mm
Dichtbreite

Price on request

Stk

Description

Gas and water tight sealing for drill holes, tubes, etc. 

  • Rubber insert made of EPDM, press plates made of stainless steel V2A
  • completly gastight and watertight
  • pressing water 2.5 bar (30 m WS)
  • radon tight
  • KTW/W270 drinking water - quality

Properties

Dichtbreite: 40 mm
ø in mm: 80 mm
Downloads "Blind plug compact V2A Ø 50 - 250 mm"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Dichtbreite
ø in mm
Price
Action
61LXN1000
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
100 mm
61LXN1001
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
80 mm
61LXN1002
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
125 mm
61LXN1003
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
150 mm
61LXN1004
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
200 mm
61LXN1005
 Blind plug compact V2A Ø 50 - 250 mm
40 mm
250 mm
Skip product gallery

Ähnliche Artikel

Blindstopfen HRD, Dichtbreite 30 mm

For non-pressing water 1.5 bar Rubber insert made of EPDM, press plates made of stainless steel V2A completly gastight and watertight NBR rubber insert on request

Details
Skip product gallery

Customers also viewed

Ringraumdichtung P-Cable Basic HRD 125

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Ringraumdichtung P-Cable Basic HRD Ø100

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Blind plug compact V2A Ø 50 - 250 mm

Gas and water tight sealing for drill holes, tubes, etc.  Rubber insert made of EPDM, press plates made of stainless steel V2A completly gastight and watertight pressing water 2.5 bar (30 m WS) radon tight KTW/W270 drinking water - quality

VIBA-PulsePressSealing closed

Die SchlagPressDichtung verfügt über ein neuartiges Ringspalt-Verpress-System und ermöglicht dadurch eine schnelle, perfekte und äußerst baustellengerechte Rohrdurchführung an bestehenden Bauwerken. Es lassen sich nahezu alle Medienrohre- wie z.B. Abwasser-, Kabelschutz-, Wasser- oder Gasrohre sicher durch Keller- oder durch entsprechende Schachtbauwerke bzw. SB-Rohre hindurchführen oder anschließen gegen drückendes Wasser dauerhaft abdichten. MFPA geprüft! in Anlehnung an FHRK GE101 2,5 bar Druckwasserdicht!

VIBA-PulsePressSealing closed

Die SchlagPressDichtung verfügt über ein neuartiges Ringspalt-Verpress-System und ermöglicht dadurch eine schnelle, perfekte und äußerst baustellengerechte Rohrdurchführung an bestehenden Bauwerken. Es lassen sich nahezu alle Medienrohre- wie z.B. Abwasser-, Kabelschutz-, Wasser- oder Gasrohre sicher durch Keller- oder durch entsprechende Schachtbauwerke bzw. SB-Rohre hindurchführen oder anschließen gegen drückendes Wasser dauerhaft abdichten. MFPA geprüft! in Anlehnung an FHRK GE101 2,5 bar Druckwasserdicht!

Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Ringraumdichtung P-Cable Basic HRD 200

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in mm which the hole can be adjusted)

KG-Rohrdurchführungen Typ FR Fließrichtung

The pipe bushing type FR fulfills the wishes of many building owners and architects to drain sewage from the building in only one direction of flow. The special connection avoids unnecessary edges. Thanks to the watertight, all-round four-web seal and an additional all-round double-wall seal, it stays dry even in the basement. The built-in covers are included in the delivery for easy and safe installation. Other diameters and wall thicknesses on request!

Ringraumdichtung P-Cable Basic HRD Ø150

The P-Cable Basic HRD annular seal is available in various designs.The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Foil clamping flange type FKF Uni A Ø 200 2.5 bar

This website uses cookies to ensure the best experience possible. More information...