Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Betontrennmittel Viba-Trenn Bio FU Pflanzenöl

Properties

Giscode: BTM 10

Betontrennmittel Viba-Trenn Bio FU Pflanzenöl

Product number: 52W2FU

Available, delivery time: 1-3 days

barrel

Price on request

l
Kanister

Description

VIBA-Trenn Bio Schalöl FU ist ein auf pflanzlicher Basis und synthetischen Ester-Komponenten aus Pflanzenölen hergestelltes Betontrennmittel, das sowohl für saugende als auch für nichtsaugende Schalungen, z.B. aus Holz, Kunststoff, Stahl sowie zur Beton/Beton-Trennung in der Betonstein- und Fertigteilindustrie bestens geeignet ist.

Es garantiert leichtes und sauberes Entschalen sowie glatte Oberflächen mit scharf profilierten Kanten. Aufgrund seiner Zusammensetzung ist das Produkt als ökologisch wertvoll einzustufen, da es ein beschleunigtes biologisches Abbauverhalten aufweist und als unschädlich für Mensch, Tier und Umwelt gilt.

Eigenschaften:

  • Einsatzbereich bis 100°C (Schalungstemperatur).
  • frei von Wachsen, Paraffinen und Silikonen.
  • umweltfreundliche und biologisch abbaubar.
  • Enthält Zusätze gegen Oxidation und Korrosion.

Properties

Giscode: BTM 10
Downloads "Betontrennmittel Viba-Trenn Bio FU Pflanzenöl"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
barrel
Price
Action
52W2FU
 Betontrennmittel Viba-Trenn Bio FU Pflanzenöl
Kanister
52W2FUF
 Betontrennmittel Viba-Trenn Bio FU Pflanzenöl
Faß
Skip product gallery

Ähnliche Artikel

Release agent for exposed concrete – Ricon emulsion based on plant-based oils

Biological architectural concrete release agent Ricon (Art. No.: 52W3) is an environmentally friendly release agent emulsion based on renewable raw materials. It has been specially developed for producing high-quality architectural concrete surfaces in precast and in-situ concrete construction. The special formulation ensures very light-colored and high-quality concrete surfaces. After application, the emulsion forms a milky white film, which disappears after the water component has flashed off. Once this evaporation process is complete, concreting can begin. Depending on weather conditions, the flashing-off time is approx. 10–30 minutes at 20°C and 60% relative humidity. Properties: Based on renewable raw materials Excellent release performance For visually high-quality and light-colored concrete surfaces Solvent-free and mineral oil-free Low odor Ready to use Easy to spra

Skip product gallery

Customers also viewed

Rundfix (PVC-free)

PVC- free spacers for vertical reinforcement.  

Rundfix (PVC-free)

PVC- free spacers for vertical reinforcement.  

Evaporation protection Antisol - E

Version: Antisol - E Antisol -E is sprayed in a thin layer onto fresh concrete surfaces. The concrete surface is covered with a waterproof protective film and thus prevents premature drying out. Prevention of shrinkage cracks. Please note! Evaporation protection is sensitive to frost. Storage only above 0 ° C

Spacer tubes with a roughened surface

Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle

Pressure cones (PVC-free) with glued sealing

Flat seal thickness 8 mm or 2 mm The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete.

ZZ-Leiste Iso 30 mm Länge 2 Meter

ZZ ISO rebar spacer is a skidproofed and tilt secured spacer for the bottom reinforcement. The material is PVC free. There will be no shrinking as the concrete encloses the batten completly. Suitable for XPS, isolation or other soft surfaces. Due to the special form a linear interruption can be avoided.

Spacer tubes with a roughened surface

Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle

Mauerkragen aus TPE - Themoplastischem Elastomer

MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps

spacers with nail holes made of plastic

spacers made of impact-resistant material for breaking edges on square columns and beams, but also for decorating large exposed concrete parts. Provide nail holes every 10-15 cm for fastening.

Tubes for cut outs

Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  

This website uses cookies to ensure the best experience possible. More information...