Properties

Ausführung:	verzinkt

Rahmen 2 x 0,65 m

Product number: 39GL10V

Ausführung

lackiert

verzinkt

Stk

Description

Stand frames from tubes 48 x 2.3 mm.
All stand parts are varnished or hot-dip galvanized available.
Version corresponds ÖNORM B 4007 and HD 1000.

Properties

Ausführung:	verzinkt

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Ausführung
39GL10	Rahmen 2 x 0,65 m	lackiert
39GL10V	Rahmen 2 x 0,65 m	verzinkt

Product Nr. : 39GL10

Rahmen 2 x 0,65 m

Price

Ausführung: lackiert

In Stock

Available on request

Product Nr. : 39GL10V

Rahmen 2 x 0,65 m

Price

Ausführung: verzinkt

In Stock

Available on request

Zubehör

Gerüstplatte (Holzbelag)

Repeatedly glued wood cover plate. Double security by glueing and with iron rod. Galvanized edges protection in both sides, for a long lifespan in the hard application.

Details

Scaffolding board (wood covering) - door

Repeatedly glued wood cover plate. Double security by glueing and with iron rod. Galvanized edges protection in both sides, for a long lifespan in the hard application.

Customers also viewed

Rahmen 2 x 0,65 m

Stand frames from tubes 48 x 2.3 mm. All stand parts are varnished or hot-dip galvanized available. Version corresponds ÖNORM B 4007 and HD 1000.

Half frame 1 m x 0,65 lacquered G0150

Half frame 1,0 x 0,65 cm from tubes 48 x 2,3 mm. All stand parts are varnished or hot-dip galvanized available. Version corresponds ÖNORM B 4007 and HD 1000.

SAM-spacer normal

Spacer system SAM for normal concrete.(no exposed concrete surface - the walls should be plastered or coverd afterwards) Easy and fast application, in combination with 27 mm Standard formwork panels. Package units:to wall thickness 50 cm 100 pcs. / Packfrom wall thickness 51 cm 50 pcs. / Pack Other special lengths (in cm downgrading) from 6 - 300 cm possible.

Deckenstütze Euro (DO) nach EN 1065

Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).

Scaffolding board (wood covering) - door

Repeatedly glued wood cover plate. Double security by glueing and with iron rod. Galvanized edges protection in both sides, for a long lifespan in the hard application.

Deckenstütze Euro (DO) nach EN 1065

Tripod for props

Suppliable with a galvanised or lacquered surface.

Deckenstütze Euro (DO) nach EN 1065

Welded coupler round

Type black - round

Bolzen- und Mattenschneider

For commercial reinforcing steel III + IV according to DIN 488 strength approx. 550 N / mm2 as well as prestressing steels and tempered steel wire up to a strength of 1570 N / mm2 (48 HRc) Please note the following when using the bolt cutters: Our bolt cutters are made of the best material. Make sure that the knives are placed at a right angle to the piece to be cut. Stronger structural steels must not be cut through at once. They must first be pressed in firmly, after which the bolt cutter is opened and pushed in again. This makes cutting easier and prevents the knives from breaking. After pressing in, the bolt cutter must not be levered, swiveled or inclined as this would lead to the cutting edges breaking out. The bolt cutters must never be used for hardened steels, concrete or steel nails. The service life of the bolt cutters is enormously extended by regularly tightening the screws.