Properties

Länge in m:	2,0 m

Gerüstplatte (Holzbelag)

Product number: 39GA011

Länge in m

1,25 m

2,0 m

2,5 m

Stk

Description

Repeatedly glued wood cover plate.
Double security by glueing and with iron rod.
Galvanized edges protection in both sides, for a long lifespan in the hard application.

Properties

Länge in m:	2,0 m

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Länge in m
39GA01	Gerüstplatte (Holzbelag)	2,5 m
39GA011	Gerüstplatte (Holzbelag)	2,0 m
39GA0111	Gerüstplatte (Holzbelag)	1,25 m

Product Nr. : 39GA01

Gerüstplatte (Holzbelag)

Price

Länge in m: 2,5 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 39GA011

Gerüstplatte (Holzbelag)

Price

Länge in m: 2,0 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 39GA0111

Gerüstplatte (Holzbelag)

Price

Länge in m: 1,25 m

In Stock

Available on request

Zubehör

Half frame 1 m x 0,65 lacquered G0150

Half frame 1,0 x 0,65 cm from tubes 48 x 2,3 mm. All stand parts are varnished or hot-dip galvanized available. Version corresponds ÖNORM B 4007 and HD 1000.

Shifting frame lacquered

Shifting fram made of tube 48 x 2,3 mm The shifting frame for extremely high steps (e.g. stairwells) All variants in lacquered or of galvanized version available!

Customers also viewed

Gerüstplatte (Holzbelag)

Repeatedly glued wood cover plate. Double security by glueing and with iron rod. Galvanized edges protection in both sides, for a long lifespan in the hard application.

Half frame 1 m x 0,65 lacquered G0150

Half frame 1,0 x 0,65 cm from tubes 48 x 2,3 mm. All stand parts are varnished or hot-dip galvanized available. Version corresponds ÖNORM B 4007 and HD 1000.

Gerüstplatte (Holzbelag)

Repeatedly glued wood cover plate. Double security by glueing and with iron rod. Galvanized edges protection in both sides, for a long lifespan in the hard application.

Shifting frame lacquered

Shifting fram made of tube 48 x 2,3 mm The shifting frame for extremely high steps (e.g. stairwells) All variants in lacquered or of galvanized version available!

Scaffolding board (wood covering) - door

Repeatedly glued wood cover plate. Double security by glueing and with iron rod. Galvanized edges protection in both sides, for a long lifespan in the hard application.

Baustütze - Mini (DC)

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!

Frame foot lacquered

perfect frame foot for flat area.

Alu-Rollgerüst Breite 1,3 m

Low total weight with the greatest achievable height Comfortable working thanks to the 1.3 m wide platform with lockable steps Maximum stability thanks to aluminum construction in professional quality Easy to move thanks to large, steerable wheels with brakes and safe to park Easy to transport, store and proven in construction site use

Bolzen- und Mattenschneider

For commercial reinforcing steel III + IV according to DIN 488 strength approx. 550 N / mm2 as well as prestressing steels and tempered steel wire up to a strength of 1570 N / mm2 (48 HRc) Please note the following when using the bolt cutters: Our bolt cutters are made of the best material. Make sure that the knives are placed at a right angle to the piece to be cut. Stronger structural steels must not be cut through at once. They must first be pressed in firmly, after which the bolt cutter is opened and pushed in again. This makes cutting easier and prevents the knives from breaking. After pressing in, the bolt cutter must not be levered, swiveled or inclined as this would lead to the cutting edges breaking out. The bolt cutters must never be used for hardened steels, concrete or steel nails. The service life of the bolt cutters is enormously extended by regularly tightening the screws.

Rahmen 2 x 0,65 m

Stand frames from tubes 48 x 2.3 mm. All stand parts are varnished or hot-dip galvanized available. Version corresponds ÖNORM B 4007 and HD 1000.