Shifting frame lacquered
Product number:
39G0600
Skip product gallery
Customers also viewed
Half frame 1 m x 0,65 lacquered G0150
Half frame 1,0 x 0,65 cm from tubes 48 x 2,3 mm.
All stand parts are varnished or hot-dip galvanized available.
Version corresponds ÖNORM B 4007 and HD 1000.
Shifting spindle
The shifting spindle for smaller unevenness.
max. height adjustment 0 - 50 cm
in lacquered or of galvanized version available!
Railing supports 1,0 m laquered G0200
Stand frames from tubes 48 x 2.3 mm.
All stand parts are varnished or hot-dip galvanized available.
Version corresponds ÖNORM B 4007 and HD 1000.
Gerüstplatte (Holzbelag)
Repeatedly glued wood cover plate.
Double security by glueing and with iron rod.
Galvanized edges protection in both sides, for a long lifespan in the hard application.
Baustütze - Mini (DC)
With covered thread (DC).
Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm
G-hook: Ø 12 mm (no loosing) with bearing ring (loose)
Failure loads tested at concentric load, pay attention to security factor!
Foundation anchor glav, height 90 cm
Simple support for the base plate stripping
Because of its expanded earth spike also applicable for soft grounds.
Betonklötze 25 mm, Vierbein
Gießbetonabstandhalter mit vier Füße. Geeignet für starke Belastung und Sichtbeton durch die schmalle Auflageflächen. Der Abstandhalter hat einen Ösendraht zur Befestigung.
Band saw UVB Z 500 S
Save time and effort at the building: with the band saw UVB Z 500 S for cutting gas-aereated concrete blocks and expanded clay - easy, quick and precise.
The quick pay-back time makes it a profitable investment!
Advantages:
Torsionally rigid body.
Practical transport position.
Precise saw blade guidance.
Saw table made of aluminium.
Vulcanised rubber lining.
Automatic limit stop.
Quick changing of saw blade (also suitable for wood).
On request with optional dust vacuum.
Faulenzer (special props)
Perpendicular and angle setting
Infinite adjustment with integrated spring base part
Can be clamped between ground and ceiling
Adjustment of the levels possible in varaible heights by sliding eyelets
With synthetic cap on the upper end
From profiled pipe inside 35 x 35, outer 40 x 40 mm
Baustütze - Mini (DC)
With covered thread (DC).
Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm
G-hook: Ø 12 mm (no loosing) with bearing ring (loose)
Failure loads tested at concentric load, pay attention to security factor!