Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Höhe in cm: 20 cm

SBA basket

Product number: 63KS20
Höhe in cm

Price on request

Stück
Stk

Description

These spacer-baskets are situated between the upper and the lower reinforcment panels.

They don't sit on the formwork (no plastic feet), therefore a proper exposed concrete can be arised.

Packing units:
big band at 800, 600, 400, 200 pieces,
small band at 10 pieces.

Properties

Höhe in cm: 20 cm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Höhe in cm
Price
Action
63KS05
 SBA basket
5 cm
63KS06
 SBA basket
6 cm
63KS07
 SBA basket
7 cm
63KS08
 SBA basket
8 cm
63KS09
 SBA basket
9 cm
63KS10
 SBA basket
10 cm
63KS11
 SBA basket
11 cm
63KS12
 SBA basket
12 cm
63KS13
 SBA basket
13 cm
63KS14
 SBA basket
14 cm
Skip product gallery

Customers also viewed

Steel-Duofix
Steel-Duofix
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
Montagefuß aus PVC für Montageanker
Montagefuß aus PVC für Montageanker
Ausführung Kunststoff (PVC).Passend für Montageanker groß (65CM15K) und klein (65CM15).Eventuell verschließen mit Stopfen Ø 20 mm. a = Innendurchmesser
ZZ-batten
ZZ-batten
Skidproofed and tilt secured spacer for the bottom reinforcement. There will be no shrinking as the concrete encloses the batten completly. Due to the special form a linear interruption can be avoided. Mill lenghts 200 cm. Other lenghts available.
Steel-Duofix
Steel-Duofix
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Wheelbarrow type 79963 polymere bearing wheel
Wheelbarrow type 79963 polymere bearing wheel
Edge of through reinforced with complete round bar. Fastening-screws invisible. Steel-rim wheel 400 x 100 mm. On demand with polymer solid-rubber wheel.
Steel-Duofix
Steel-Duofix
Robust mash connector made of steel of 5 mm diameter including two sputtered plastic clamps. Keeps the distance between the mashes as well as the distance between the meshes and the formwork. Other concrete cover on request!
SBA basket
SBA basket
These spacer-baskets are situated between the upper and the lower reinforcment panels. They don't sit on the formwork (no plastic feet), therefore a proper exposed concrete can be arised.Packing units: big band at 800, 600, 400, 200 pieces, small band at 10 pieces.
Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30
Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN
Montageanker GTW 45 15,0 mm
Montageanker GTW 45 15,0 mm
Ausführung schwarz. Zur Befestigung in Schalung wird der Montagefuß (65CM15F) empfohlen. Einbautiefe: 108 mm, Betongüte: >= B 25.Max. Tragkraft mit 3-facher Sicherheit bei: B25 = 30kN, B35 = 40 kN. Prüfbescheinigung in Anlehnung DIN 18216
This website uses cookies to ensure the best experience possible. More information...