Go to homepage
Catalogue
Wishlist
Request Basket
Categories
Skip image gallery
Zwiebeldichtung Basic 1

Properties

Ausführung: teilbar
Breite in mm: 40 mm
Medium pipe Ø: 110 - 162 mm
Verstellbereich in mm: MR Ø 110 - 162 mm
ø in mm: 200 mm

Zwiebeldichtung Basic 1

Product number: 61LXN1201701

Available, delivery time: 1-3 days

ø in mm
Breite in mm
Medium pipe Ø

Price on request

Stk

Description

Annular seal Basic 1 made of stainless steel
Stainless V2A

Seal width 40 mm

completely gastight and watertight

built-in torque control

EPDM rubber insert

To split the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring approx. 10 mm to the left or right of the screw hole with a sharp knife.

Properties

Ausführung: teilbar
Breite in mm: 40 mm
Medium pipe Ø: 110 - 162 mm
Verstellbereich in mm: MR Ø 110 - 162 mm
ø in mm: 200 mm
Downloads "Zwiebeldichtung Basic 1"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Breite in mm
Medium pipe Ø
ø in mm
Price
Action
61LXN1201701
 Zwiebeldichtung Basic 1
40 mm
110 - 162 mm
200 mm
61LXN1201721
 Zwiebeldichtung Basic 1
40 mm
70 - 112 mm
150 mm
61LXN120173
 Zwiebeldichtung Basic 1
40 mm
159 - 211 mm
250 mm
61LXN120175
 Zwiebeldichtung Basic 1
50 mm
200 - 252 mm
300 mm
Skip product gallery

Customers also viewed

Zwiebeldichtung Basic 1

Annular seal Basic 1 made of stainless steelStainless V2A Seal width 40 mm completely gastight and watertight built-in torque control EPDM rubber insert To split the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring approx. 10 mm to the left or right of the screw hole with a sharp knife.

Vitzthum - concrete form TUBE PLUS

Concrete form Tube Plus guarantees smooth surface. Other lengths on request!

Mounting plate

Mounting plates 70 x 70 mm without slot Mounting plates with slot on request

Ringraumdichtung Basic 1 - Dichtungsbreite 40 mm

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 40 mm for pressing water up to 2.5 bar completley gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To split the annular seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Kunststoff-Futterrohr WELLO mit Quellband

WELLO, the lining tube made of PE with an all-round swelling coating. The tube is smooth inside. The undulating outside clings to the concrete. Two swelling tapes applied around the center also prevent water from entering the structure Wello casing, double security through corrugation and swelling tape, sealing by means of an annular seal. Tested up to 30m water column.

Zwiebeldichtung Basic 1

Annular seal Basic 1 made of stainless steelStainless V2A Seal width 40 mm completely gastight and watertight built-in torque control EPDM rubber insert To split the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring approx. 10 mm to the left or right of the screw hole with a sharp knife.

Ringraumdichtung Basic 1 - Dichtungsbreite 20 mm

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To divide the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring radially about 10 mm to the left or right of the screw hole with a sharp knife.

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 18 - 65 mm

Super segment ring technology for cables and pipes; 12 segment rings with a diameter of 16 - 65 mm; simply tear off the segments until they fit split design, suitable for subsequent installation Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plug

Zwiebeldichtung Basic 1

Annular seal Basic 1 made of stainless steelStainless V2A Seal width 40 mm completely gastight and watertight built-in torque control EPDM rubber insert To split the press seal Basic 1, loosen and remove a screw. Unfold the front and rear press segment and cut the rubber press ring approx. 10 mm to the left or right of the screw hole with a sharp knife.

Seal "onion ring" technology Ø 200 mm - divisible MR Ø 110, 125, 135, 160 mm

Super segment ring technology for cables and pipes segment rings with diameter inscription for Ø 110, 125, 135 and 160 mm Subsequently divisible for pipes that have already been laid for core drilling / wall sleeves Ø 150 mm Seal width 40 mm, pressure-tight up to 1 bar integrated torque control visible and tangible U-profile and screws made of stainless steel V2A EPDM rubber insert integrated blind plugs

This website uses cookies to ensure the best experience possible. More information...