Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Höhe in cm
Price
Action
65F
VIBA-Fundamentspanner
97 cm
65F2
VIBA-Fundamentspanner
142 cm
Skip product gallery

Zubehör

VIBA-punched steel strip 50 x 2,0 mm hole Ø 20/22 mm
Horizontal frame-elements for formworks of fundaments. Anchoring:On top with anchor rod Ø 15,0 mm and "super" nut.On base with VIBA-foundation tensioner and VIBA-punched steel strip.Wall thicknesses within a 5 cm grid can be produced. Load:punched steel strip max. 12 kNpunched steel strip length = wall thickness + 50 cm
Skip product gallery

Customers also viewed

Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN
VIBA-Fundamentspanner
used in connection with perforated tapes by large area formwork in different heights available by height 970 mm: max. element width 900 mm by height 1420 mm: max. element width 1350 mm
VIBA - Kombianker Ø 15 mm SW 13 Bohrloch 14 mm
VIBA - Betonschraube KTEC<?xml:namespace prefix = "o" ns = "urn:schemas-microsoft-com:office:office" />   Vielfältige Anwendungsbereiche für alle zeitlich begrenzten Befestigungen mit niedriger bis mittlerer Belastung, z.B. Maschinenbefestigungen wie Kernbohrgeräte, Betonbearbeitungsmaschinen etc.   Enorme Zeitersparnis – bis zu 30%. Keine Reinigung des Bohrloches erforderlich; zusätzliche Arbeitsvorgänge entfallen Kein Dübel, keine Spreizwirkung. Minimaler Einsatz von Werkzeugen, Akkuschrauber empfohlen! Einfachste Kontrolle über Bohrloch Ø,-Tiefe und vollständig eingedrehtes Gewinde.   Wiederverwendbar! Je nach Untergrundbeschaffenheit sind bis zu 20 Setzvorgänge möglich.
VIBA - Querkraftdorn - Dorn verzinkt
Steel quality: S 235 JR (ST37) Surface galvanized Other lengths and dimensions on request
Betonklötze 20 mm, Vierbein
Gießbetonabstandhalter mit vier Füße. Geeignet für starke Belastung und Sichtbeton durch die schmalle Auflageflächen. Der Abstandhalter hat einen Ösendraht zur Befestigung.
Contact adhesive CEM 805 for swelling waterstop and joint sealing strip
CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages:  Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible
Betonklötze 30 mm, Vierbein
Gießbetonabstandhalter mit vier Füße. Geeignet für starke Belastung und Sichtbeton durch die schmalle Auflageflächen. Der Abstandhalter hat einen Ösendraht zur Befestigung.
VIBA-joint sheet roll ACTIVE - 160 mm unilaterally coated with Bentonit
  VIBA thick tin Active is a galvanised, unilaterally full-flatly with active Bentonitcoated sealing metal with source effect. In both forking out a 7,5 cm wide high sticking push connection is raised. incl. 20 connection hangers, 4 push clips + 1,5 m of push connection (self-adhesive)
Concrete screw - Multi-Monti
Verzinkte patentierte Betonschraube mit Sechskant und FlanschETA-15/0784 und 15/0785 Zulassung Zwei Einschraubtiefen — Ein echtes Plus für mehr Flexibilität und Wirtschaftlichkeit (alle Hinweise dazu auf der Verpackung)<?xml:namespace prefix="o" /> Neuer Schraubenkopf: Sechskantkopf mit angepresster Scheibe Kopfprägung MMS+ Erhöhung des Gewindeaußendurchmessers: Größere hinterschnittene Fläche durch das Gewinde im Beton Optimierte Tragfähigkeit im Beton Überarbeitete Funktionsspitze: Stärkere Verzahnung und größerer Außendurchmesser der Spitze Größerer Hinterschnitt Geringeres Verschleißverhalten der Funktionsspitze Weniger Verschleiß beim Einschrauben Hoher Montagekomfort – geringe Montagedrehmomente Für Befestigungen in Beton nach ETA-15/0784 und ETA-15/0785
VIBA - Querkraftdorn - Dorn blank
Type blank Other lengths and dimensions on request.