Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Höhe in cm: 142 cm

VIBA-Fundamentspanner

Product number: 65F2

Available, delivery time: 1-3 days

Höhe in cm

Price on request

Stk

Description

used in connection with perforated tapes by large area formwork in different heights available

by height 970 mm: max. element width 900 mm

by height 1420 mm: max. element width 1350 mm

Properties

Höhe in cm: 142 cm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Höhe in cm
Price
Action
65F
 VIBA-Fundamentspanner
97 cm
65F2
 VIBA-Fundamentspanner
142 cm
Skip product gallery

Zubehör

VIBA-punched steel strip 50 x 2,0 mm hole Ø 20/22 mm
VIBA-punched steel strip 50 x 2,0 mm hole Ø 20/22 mm
Horizontal frame-elements for formworks of fundaments. Anchoring:On top with anchor rod Ø 15,0 mm and "super" nut.On base with VIBA-foundation tensioner and VIBA-punched steel strip.Wall thicknesses within a 5 cm grid can be produced. Load:punched steel strip max. 12 kNpunched steel strip length = wall thickness + 50 cm
Skip product gallery

Customers also viewed

VIBA-Fundamentspanner
VIBA-Fundamentspanner
used in connection with perforated tapes by large area formwork in different heights available by height 970 mm: max. element width 900 mm by height 1420 mm: max. element width 1350 mm
VIBA-punched steel strip 50 x 2,0 mm hole Ø 20/22 mm
VIBA-punched steel strip 50 x 2,0 mm hole Ø 20/22 mm
Horizontal frame-elements for formworks of fundaments. Anchoring:On top with anchor rod Ø 15,0 mm and "super" nut.On base with VIBA-foundation tensioner and VIBA-punched steel strip.Wall thicknesses within a 5 cm grid can be produced. Load:punched steel strip max. 12 kNpunched steel strip length = wall thickness + 50 cm
Schalungsbinder SAM 2
Schalungsbinder SAM 2
Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.
Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30
Uni Concrete Sleeve Ø 15 mm Three-Piece PA66GF30
Anchor sleeve UNI Ø 15 mm three-part made of PA66GF30 With internal winch for Ø 15 mm Dywidag tie rod. Ideal use for fastening slab edge formwork, consoles, scaffolding, guardrails, etc. Permissible load 28KN
Schalungsbinder SAM 2
Schalungsbinder SAM 2
Suitable for Standard formwork panels width 25, 50 and 100 cm. multiple reusable binder made of steel strip. The length 100 cm is reinforced in the middle.
VIBA mandrel sleeve
VIBA mandrel sleeve
Bearing made of plastic to absorb moving forces of VIBA shear force dowel. The quill zone allows a longitudinal movement up to 20 mm. In the colours: yellow gray green blue black available.
Foundation anchor glav, height 90 cm
Foundation anchor glav, height 90 cm
Simple support for the base plate stripping Because of its expanded earth spike also applicable for soft grounds.
Knock-in anchor D&W Ø 15mm
Knock-in anchor D&W Ø 15mm
With internal thread for Ø 15 mm Dywidag tension rod Borehole Ø 22 mm borehole depth 95 mm Permissible load capacity min. 17.0 kN with a minimum concrete strength of 15N / mm²
VIBA mandrel sleeve
VIBA mandrel sleeve
Bearing made of plastic to absorb moving forces of VIBA shear force dowel. The quill zone allows a longitudinal movement up to 20 mm. In the colours: yellow gray green blue black available.
Faulenzer (special props)
Faulenzer (special props)
Perpendicular and angle setting Infinite adjustment with integrated spring base part Can be clamped between ground and ceiling Adjustment of the levels possible in varaible heights by sliding eyelets With synthetic cap on the upper end From profiled pipe inside 35 x 35, outer 40 x 40 mm
This website uses cookies to ensure the best experience possible. More information...