Deckenschalung

Close filters
 
Preis from Preis to
1 From 2
Deckenrandschalung XPS 35 FZ ISO Deckenrandschalung XPS 35 FZ ISO
Slab edge shuttering and insulation in one . 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Deckenrandschalung XPS 50 FZ ISO Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one . 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Baustütze - Mini (DC) Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Holz-Schalungsträger H20 Holz-Schalungsträger H20
Long lifetime through high quality gluing Protection against damages through special beam end version Low weight Packaging: 50 / 100 pcs Dimension stable Other lengths on request
Deckenrandschalung HB aus Holzbeton Deckenrandschalung HB aus Holzbeton
Stop end formwork made of woodconcrete. Element length - 200 cm Material strength - 10 mm Width at foot - 70 mm
Dreifuß-Ständer für Stützen Dreifuß-Ständer für Stützen
Suppliable with a galvanised or lacquered surface.
Deckenstütze Euro (DO) nach EN 1065 Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no...
Deckenstütze Stabil (DC) nach EN 1065 Deckenstütze Stabil (DC) nach EN 1065
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no...
Randabschaler Randabschaler
Easy device for shuttering of ceiling etc. Mounting on the walls with any turnbuckle or threaded rod. Height adjustable through longitudinal slot. Time saving Easy handling No Wood surplus
Lower-Prop head, galvanised Lower-Prop head, galvanised
Suitable for props for hole Ø 40 mm. For wood formwork beams H 20
Deckenstützen Euro (DC) nach EN 1065 Deckenstützen Euro (DC) nach EN 1065
All versions with failure protection, accident proof. Props in different sizes and versions. Failure loads tested according to EN 1065. Produced and tested according to EN 1065 , with covered thread (DC). With failure protection and...
1 From 2
Viewed