Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
ø in cm
Price
Action
63M15
Bewehrungsspirale für Baurohre
10 cm
63M20
Bewehrungsspirale für Baurohre
15 cm
63M25
Bewehrungsspirale für Baurohre
20 cm
63M30
Bewehrungsspirale für Baurohre
24 cm
63M35
Bewehrungsspirale für Baurohre
30 cm
Skip product gallery

Zubehör

Vitzthum-formwork TUBE PLUS
Tube Plus guarantees a smooth surface. The inside of the shuttering tube is covered with a smooth film. Other lengths on request!
Vitzthum-Baurohr Standard-Spiral
Concrete form round in spiral version. Other lengths on request!
Skip product gallery

Customers also viewed

Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Slanted props (DC)
All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)
Fleece Geotextile
Geotex is a mechanic strengthend fleece to split and filter.Main application is gravel, passably and grassed flat roofs. What can Geotex - fleece? Geotex seperate the particle to allow unhindered drain of water. The fleece prevent, even by high drain amount, blockage.
Bewehrungsspirale für Baurohre
Wire length = 7,5 m Usage length = 1,0 m
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
Bewehrungsspirale für Baurohre
Wire length = 7,5 m Usage length = 1,0 m
Slanted props (DC)
All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)
Steel props STABIL (DC)
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  
Lower-Prop head, galvanised
Suitable for props for hole Ø 40 mm. For wood formwork beams H 20