Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

für Ankerstab ø: 26,5 mm
ø in mm: 26 mm

Positioning cone steel/plastic

Product number: 65CV26
für Ankerstab ø
Product request
Stk
Positioning cone steel/plastic
für Ankerstab ø: 26,5 mm

Fields marked with asterisks (*) are required.

(Product number: 65CV26)

Description

Galvanised

appropriate for tie rod Ø 15 and 20 mm

Properties

für Ankerstab ø: 26,5 mm
ø in mm: 26 mm
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
für Ankerstab ø
Price
Action
65CV15
 Positioning cone steel/plastic
15 mm
65CV20
 Positioning cone steel/plastic
20 mm
65CV26
 Positioning cone steel/plastic
26,5 mm
Skip product gallery

Zubehör

Pfeifenkopfschlüssel
Pfeifenkopfschlüssel
To unscrew positioning screw 15 and 20 mm  
Ankerstab Ø 15,0 mm (90 kN) schwarz
Ankerstab Ø 15,0 mm (90 kN) schwarz
Hot-rolled steel. Self-cleaning D&W Twin-rib threaded steel. Standard length: 6m Other lengths on request
Sichtbetonkegel für Vorlaufkonus
Sichtbetonkegel für Vorlaufkonus
The high-quality, precisely tailored exposed concrete cone is glued in flush after the pressure cones have been removed in order to achieve a clean visible surface.
Skip product gallery

Customers also viewed

Positioning cone steel/plastic
Positioning cone steel/plastic
Galvanised appropriate for tie rod Ø 15 and 20 mm
Positioning cone steel/plastic
Positioning cone steel/plastic
Galvanised appropriate for tie rod Ø 15 and 20 mm
Ankermutter Ø 15 mm - verzinkt
Ankermutter Ø 15 mm - verzinkt
Platte Ø 100  mmMutter für übergreifende Auflagerung passend Ankerstäbe-Ø 15 mm Ausführung verzinkt.
Formwork oil Prägnit ST300
Formwork oil Prägnit ST300
Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.  Degredable for 81% within 21 days.
Hakenanker Ø 15 - schwarz
Hakenanker Ø 15 - schwarz
To anchore single-sided system to the floor, to mount formwork element,  A-frames, scaffolding bracket, etc. Design: Black
Formwork oil Prägnit ST300
Formwork oil Prägnit ST300
Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.  Degredable for 81% within 21 days.
spacers with plastic nail flags
spacers with plastic nail flags
Chamfer strip made of impact-resistant material to breack edges and also as decoration by extensive exposed-concrete parts. Fixing at an interval of 10-15 cm with nail holes.
Formwork oil Prägnit ST300
Formwork oil Prägnit ST300
Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary.  Degredable for 81% within 21 days.
Flächenabstandhalter Bogen mit Noppen
Flächenabstandhalter Bogen mit Noppen
Made of fibre concrete with pimples for horizontal mats reinforcement. There are only a few support points due to nubby surface.
Flächenabstandhalter Faserbeton - T-Profil
Flächenabstandhalter Faserbeton - T-Profil
Rod spacer made of fibre reinforced concrete.Manufactoring length 100 cm. Also available in different lenghts (e.g. 18, 25 and 33).
This website uses cookies to ensure the best experience possible. More information...