Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Länge in mm: 10 mm
Rohr ø in mm: 32 mm

Pressure cone standard (PVC-free)

Product number: 65AF32
Rohr ø in mm

Price on request

Stück
Stk

Description

The pressure cones are attached to the spacer tube.

After concreting, the pressure cones are removed from the concrete and can be reused.

Properties

Länge in mm: 10 mm
Rohr ø in mm: 32 mm
Downloads "Pressure cone standard (PVC-free)"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Rohr ø in mm
Price
Action
65AF20
 Pressure cone standard (PVC-free)
20 mm
65AF22
 Pressure cone standard (PVC-free)
22 mm
65AF26
 Pressure cone standard (PVC-free)
26 mm
65AF32
 Pressure cone standard (PVC-free)
32 mm
Skip product gallery

Ähnliche Artikel

Exposed concrete plugs for pressure cone
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
Grooved cone (VIBADISTANZ) Ø 22 mm
Grooved cone (VIBADISTANZ) Ø 22 mm
Grooved cone (Vibadistant) Ø 22 mm
Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with roughed surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundles. Standard length is 2,0 metre. Ø 20mm to Ø 22mm 100 running meters per bundle Ø 26mm to Ø 32mm 50 running meters per bundle Ø 40mm 30 running meters per bundle
Flat seal adhesive
Flat seal adhesive
The sealing is used at exposed concrete construction between pressure cone and formwork shell. It helps to secure a perfect concrete surface.
Skip product gallery

Customers also viewed

Pressure cone standard (PVC-free)
Pressure cone standard (PVC-free)
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.
Pressure cone standard (PVC-free)
Pressure cone standard (PVC-free)
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.
Pressure cone standard (PVC-free)
Pressure cone standard (PVC-free)
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.
Grooved cone (VIBADISTANZ) Ø 22 mm
Grooved cone (VIBADISTANZ) Ø 22 mm
Grooved cone (Vibadistant) Ø 22 mm
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
VIBADISTANZ spacer tube (VDZ) incl. 2 plugs
Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE
Deckenrandschalung XPS 50 FZ ISO
Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Abstandrohre mit aufgerauter Oberfläche von Ø 20mm bis Ø 40mm in Bunden. Standardlänge ist 2,0 Meter.
Spacer tubes with a roughened surface
Spacer tubes with a roughened surface from Ø 20mm to Ø 40 mm in bundlesØ 20mm to Ø 22mm 100 running meters per bundleØ 26mm to Ø 32mm 50 running meters per bundleØ 40mm 30 running meters per bundle
Deckenrandschalung XPS 50 FZ ISO
Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Deckenrandschalung XPS 50 FZ ISO
Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Exposed concrete plugs for pressure cone
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
This website uses cookies to ensure the best experience possible. More information...