Skip to main content Skip to search Skip to main navigation
Downloads "PE wall damp course"
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Breite in cm
Price
Action
68ZA18
PE wall damp course
18 cm
68ZA27
PE wall damp course
27 cm
68ZA29
PE wall damp course
29 cm
68ZA32
PE wall damp course
32 cm
68ZA34
PE wall damp course
34 cm
68ZA40
PE wall damp course
40 cm
68ZA54
PE wall damp course
54 cm
Skip product gallery

Customers also viewed

Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
PE wall damp course
The damp proof courses protect the masonry from rising moisture. Both sides of the material are ripped and increase the liability to the mortar. Material: Polyethylen, slip-resistant; Thickness: ca. 0,4 mm.
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Mauerkragen aus TPE - Themoplastischem Elastomer
MPA certificated! Masonry collars from TPE-Themoplastic Elastomer Application area:The sealing collar is used whenever a water-tight lead-through of pipe lines through foundation slabs, walls, and masonry is required. The sealing collar, which has passed the pressure test at 5 bar, prevents moisture from getting into the building along the outer pipe walls. Tested for impermeability up to 50 m water column. Properties:The sealing collar is supplied in pre-assembled condition with 2 stainless steel straps. The circular, 4 cm wide collar, which is equipped with additional waterstops, prevents liquids from getting into the building. Small waterstops inside the collar ensure water-tightness up to a water column of 50 m after tightening of the stainless steel fastening straps.Assembly clean pipe surface if necessary slide on the sealing collar and fix it in the centre of the concrete/wall tighten the fastening straps
Fixation clamp f. XPS Stop end formwork
Fixation clamp for stop end formwork XPS Material: Plastic, injection molding  
PVC anchor
Very stable anchor or nail made of synthetic material for fastener von isulating material.
Vitzthum-Baurohr Standard-Spiral
Concrete form round in spiral version. Other lengths on request!
PE wall damp course
The damp proof courses protect the masonry from rising moisture. Both sides of the material are ripped and increase the liability to the mortar. Material: Polyethylen, slip-resistant; Thickness: ca. 0,4 mm.
Deckenrandschalung XPS 35 FZ ISO
Slab edge shuttering and insulation in one. 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
PVC anchor
Very stable anchor or nail made of synthetic material for fastener von isulating material.