Formwork stripes

Höhe in cm:	20 cm
Länge in m:	10 m

Höhe in cm:	20 cm
Länge in m:	10 m

Product Nr.	Product	Höhe in cm	Länge in m	Price	Action
69S2320	Formwork stripes	20 cm	10 m	Log in to see more information	Log in or Sign up
69S2322	Formwork stripes	22 cm	10 m	Log in to see more information	Log in or Sign up
69S2325	Formwork stripes	25 cm	10 m	Log in to see more information	Log in or Sign up
69S2330	Formwork stripes	30 cm	10 m	Log in to see more information	Log in or Sign up
69S2350	Formwork stripes	50 cm	6,0 m	Log in to see more information	Log in or Sign up

VIBA Plex F Formwork Board 10

The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable

Ripped drawb netak Lochripp

Element size 250 x 60 cm Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong bonding effect through stong surface profiling. Great stability thanks to 10 mm high ribs and bead reinforcement. Very cost-effective because there is no need to remove or clean the formwork

Ribbed drawn metal Superrip

Used as shuttering formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong composite effect becauce of the strong surface profiling. Particularly high stability thanks to 21 mm high ribs and bead reinforcement as well as a higher material thickness of 0.4 or 0.6 mm. Very cost-effective, as there is no need to remove or clean the formwork Element size 200 x 44.5 cm

Installationsbloc "Prottelith"

Product properties: non-flammable passable insensitive to moisture frost-resistent easy perforation of openings Bulk density: 300 kg m³, +- 5% Compressive strength: 240 kPa (10% compression) Baustoffklasse: A2, s1, dO(ÖNORM EN 13501-1)

Ribbed drawn metal Superrip

Used as shuttering formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong composite effect becauce of the strong surface profiling. Particularly high stability thanks to 21 mm high ribs and bead reinforcement as well as a higher material thickness of 0.4 or 0.6 mm. Very cost-effective, as there is no need to remove or clean the formwork Element size 200 x 44.5 cm

Formwork stripes

The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15. The profiling allows optimum connection in concrete. Available in all heights from 14 to 36 cm. Installation instruction: 1. Cut the needed length with a cutter from the roll. 2. Fold the formwork stripes in the required size. 3. Connect the overlapped endings with binding wire. 4. Nail the recess quiver sideward through the punch opening.

Ripped drawb netak Lochripp

Element size 250 x 60 cm Used as permanent formwork in concrete and reinforced concrete construction. Longitudinal ribs ensure high load-bearing capacity. Strong bonding effect through stong surface profiling. Great stability thanks to 10 mm high ribs and bead reinforcement. Very cost-effective because there is no need to remove or clean the formwork

Tubes for cut outs

Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m

Formwork stripes

The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15. The profiling allows optimum connection in concrete. Available in all heights from 14 to 36 cm. Installation instruction: 1. Cut the needed length with a cutter from the roll. 2. Fold the formwork stripes in the required size. 3. Connect the overlapped endings with binding wire. 4. Nail the recess quiver sideward through the punch opening.

Formwork stripes

The formwork stripes is used to create recesses in base plates and ceiling. The formwork stripes (length: 10m) are perforated in transverse direction each 5 cm. It is possible to creates recesses in different dimensions. As example: 25 / 25 , 20 / 20 or 15 / 15. The profiling allows optimum connection in concrete. Available in all heights from 14 to 36 cm. Installation instruction: 1. Cut the needed length with a cutter from the roll. 2. Fold the formwork stripes in the required size. 3. Connect the overlapped endings with binding wire. 4. Nail the recess quiver sideward through the punch opening.

Properties

Formwork stripes

Description

Properties