To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Properties

Ausführung:	lackiert
Max. Belastung bei max. Höhe:	7,9 kN
Verstellbereich in m:	2,3 - 4,0 m

Steel props STABIL (DC)

Product number: 25S3

Verstellbereich in m

1,55 - 2,50 m

1,77 - 3,00 m

2,05 - 3,50 m

2,3 - 4,0 m

Stk

Description

Produced and tested according to EN 1065, with covered thread (DC).

Props in different sizes and versions.

With failure protection and accident proof.

Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm
G-hook: Ø 14 mm (no loosing) with bearing ring.

Ausführung:	lackiert
Max. Belastung bei max. Höhe:	7,9 kN
Verstellbereich in m:	2,3 - 4,0 m

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Verstellbereich in m
25S0	Steel props STABIL (DC)	1,55 - 2,50 m
25S1	Steel props STABIL (DC)	1,77 - 3,00 m
25S2	Steel props STABIL (DC)	2,05 - 3,50 m
25S3	Steel props STABIL (DC)	2,3 - 4,0 m

Product Nr. : 25S0

Steel props STABIL (DC)

Price

Verstellbereich in m: 1,55 - 2,50 m

In Stock

Available on request

Product Nr. : 25S1

Steel props STABIL (DC)

Price

Verstellbereich in m: 1,77 - 3,00 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 25S2

Steel props STABIL (DC)

Price

Verstellbereich in m: 2,05 - 3,50 m

In Stock

Available, delivery time: 1-3 days

Product Nr. : 25S3

Steel props STABIL (DC)

Price

Verstellbereich in m: 2,3 - 4,0 m

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Steel props STABIL (DC)

Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.

Steel props STABIL (DC)

Baustütze - Mini (DC)

With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!

Seal "onion ring" technology Ø 100 mm - divisible MR Ø 25, 32, 40, 50 und 63 mm

Super segment ring technology for cables and pipes Open the pipe seal. Cut into the selected segment rings at the predetermined separation point with a sharp knife and tear off 5 segment rings with a diameter of 25 - 63 mm segment ring Pipe area Plug Ø 25 - 28 mm Nr. 1 Ø 32 mm Nr. 2 Ø 40 mm Nr. 3 Ø 50 mm Nr. 4 Ø 63 mm

Schrägstütze 3,20 - 5,60 m DC

All versions with failure protection, accident proof. Universally usable as pressure- and traction props to support and adjust prefabricated concrete elements and formwoks. Flexible head- and baseplate Headplate: 140 x 100 x 6 mm, with hole ø 20 mm G-hook: Ø 14 mm (no loosing)

Bewehrungsspirale für Baurohre

Wire length = 7,5 m Usage length = 1,0 m

Painted wall mounting bracket

Console bracket for precast concrete ceilings. In painted design. The bracket can be screwed onto a finished ceiling. The console holder accommodates up to 50 mm.

Tubes for cut outs

Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m

Spacer Speedies ceiling SH

Application: For concreting storey ceilings or concrete slabs as spacers for the lower reinforcement. Furthermore, the Speedies surface spacers can also be used very well in the precast concrete plant thanks to the pointed feet. With this design, the pointed feet achieve an optimal concrete flow and thereby reduce visibility in the concrete surface. Your advantage: Material polypropylene-PP Pressure-resistant / very high stability Ergonomic Transport-optimized (Euro pallet) Consumption approx. 1-1.5 pieces / m² patent pending MPA approved