Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Properties

Ausführung: lackiert
Max. Belastung bei max. Höhe: 12,4 kN
Verstellbereich in m: 1,77 - 3,00 m

Steel props STABIL (DC)

Product number: 25S1
Verstellbereich in m
Stk

Description

Produced and tested according to EN 1065, with covered thread (DC).

Props in different sizes and versions.

With failure protection and accident proof.

  • Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm
  • G-hook: Ø 14 mm (no loosing) with bearing ring.

 

Properties

Ausführung: lackiert
Max. Belastung bei max. Höhe: 12,4 kN
Verstellbereich in m: 1,77 - 3,00 m
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Verstellbereich in m
25S0
 Steel props STABIL (DC)
1,55 - 2,50 m
25S1
 Steel props STABIL (DC)
1,77 - 3,00 m
25S2
 Steel props STABIL (DC)
2,05 - 3,50 m
25S3
 Steel props STABIL (DC)
2,3 - 4,0 m
Skip product gallery

Ähnliche Artikel

Dreifuß-Ständer für Stützen
Dreifuß-Ständer für Stützen
Suppliable with a galvanised or lacquered surface.
Details
Skip product gallery

Customers also viewed

Steel props STABIL (DC)
Steel props STABIL (DC)
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  
Deckenstütze Euro (DO) nach EN 1065
Deckenstütze Euro (DO) nach EN 1065
Produced and tested according to EN 1065, with visible thread (DO). With failure protection and accident proof. Headplate: 120 x 120 x 8 mm, with borehole Ø 40 mm Headplate: * 140 x 140 x 8 mm, with borehole Ø 40 mm G-hook: Ø 15 mm (no loosing).
Tripod for props
Tripod for props
Suppliable with a galvanised or lacquered surface.
Steel props STABIL (DC)
Steel props STABIL (DC)
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  
Steel props STABIL (DC)
Steel props STABIL (DC)
Produced and tested according to EN 1065, with covered thread (DC). Props in different sizes and versions. With failure protection and accident proof. Headplate: class A 120 x 120 x 6 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.  
Three-layer plate Standard, thick: 27 mm
Three-layer plate Standard, thick: 27 mm
Three layer plywood weather-resistant glued Surface with  melamine-resin (yellow). Other colours on request. Special formats on request Additional millings possible! All standard cuts are possible!
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Holz-Schalungsträger H20
Holz-Schalungsträger H20
Long lifetime through high quality gluing Protection against damages through special beam end version Low weight Packaging: 50 / 100 pcs Dimension stable Other lengths on request
Tubes for cut outs
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
This website uses cookies to ensure the best experience possible. More information...