Axis for fixed earthing point

Wall traverese with two ground clips M10. Option with water barrier "Safe" and without "Solo". Material: Stainless steel V4A The lightning wall traverse are available in different wall strengths.

Wall traverse with M10 gound clips for wall strengths 200 - 500 mm. The position of connectors can be adjusted to different heights and depths. Ground clips V4A stainless steel, steel rope Ø 10 mm Additional type available with water barrier "Safe". 

Length 200 mmThread M 10

for connection to the reinforcement of buildings andfor connection for leads

Design: disc stainless steel,Sleeve galvanized and chromated.

VIBA-Trenn Bio Schalöl FU ist ein auf pflanzlicher Basis und synthetischen Ester-Komponenten aus Pflanzenölen hergestelltes Betontrennmittel, das sowohl für saugende als auch für nichtsaugende Schalungen, z.B. aus Holz, Kunststoff, Stahl sowie zur Beton/Beton-Trennung in der Betonstein- und Fertigteilindustrie bestens geeignet ist. Es garantiert leichtes und sauberes Entschalen sowie glatte Oberflächen mit scharf profilierten Kanten. Aufgrund seiner Zusammensetzung ist das Produkt als ökologisch wertvoll einzustufen, da es ein beschleunigtes biologisches Abbauverhalten aufweist und als unschädlich für Mensch, Tier und Umwelt gilt. Eigenschaften: Einsatzbereich bis 100°C (Schalungstemperatur). frei von Wachsen, Paraffinen und Silikonen. umweltfreundliche und biologisch abbaubar. Enthält Zusätze gegen Oxidation und Korrosion.

Biological architectural concrete release agent Ricon (Art. No.: 52W3) is an environmentally friendly release agent emulsion based on renewable raw materials. It has been specially developed for producing high-quality architectural concrete surfaces in precast and in-situ concrete construction. The special formulation ensures very light-colored and high-quality concrete surfaces. After application, the emulsion forms a milky white film, which disappears after the water component has flashed off. Once this evaporation process is complete, concreting can begin. Depending on weather conditions, the flashing-off time is approx. 10–30 minutes at 20°C and 60% relative humidity. Properties: Based on renewable raw materials Excellent release performance For visually high-quality and light-colored concrete surfaces Solvent-free and mineral oil-free Low odor Ready to use Easy to spra

Wall traverese with two ground clips M10. Option with water barrier "Safe" and without "Solo". Material: Stainless steel V4A The lightning wall traverse are available in different wall strengths.

Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE

BEG 90 Standard Concrete smoothing machine to smooth concrete and floor screed for perfect surface compression. Simple and safe in usage. Solid, reliable and long lifetime through the strong tubular steel frame and worm gear.   Special features: steel frame Power transmission with centrifugal clutch Simple Maintenance Gear, Maintenance-free > EINSATZMÖGLICHKEITEN Smoothing and compressing of concrete > TECHNICAL DATA Position feature Engine 4,8 kW Ø-Working width 900 mm Work weight 92 kg Ø-Tool 900 mm Fuel tank 3,6 l Apply Concrete, floor screed

Technical specifications: Load capacity:              500 kg / m², max. 1500 kg                                    Extracts max. 125 kg                                    Attachment max. 300 kg Platform height:             stepless from 0.46 - 1.80 meters without wheelset Platform size:                width 1.20 m                                    length 2.19 - 3.49 m Transport dimensions:   2.19 x 1.26 x 0.46 m Weight:                        498 kg Electrical connection:    1 device plug 230V 16A feed

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages:  Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible