Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Deckenrandschalung XPS 35 FZ ISO

Product number: 83R30074
Deckenstärke in cm

Price on request

m
m

Description

Slab edge shuttering and insulation in one.

35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm)

Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.

Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Deckenstärke in cm
Price
Action
83R30072
 Deckenrandschalung XPS 35 FZ ISO
16 cm
83R30073
 Deckenrandschalung XPS 35 FZ ISO
18 cm
83R30074
 Deckenrandschalung XPS 35 FZ ISO
20 cm
83R30075
 Deckenrandschalung XPS 35 FZ ISO
22 cm
83R30077
 Deckenrandschalung XPS 35 FZ ISO
25 cm
83R30078
 Deckenrandschalung XPS 35 FZ ISO
30 cm
Skip product gallery

Zubehör

Fixation clamp f. XPS Stop end formwork
Fixation clamp f. XPS Stop end formwork
Fixation clamp for stop end formwork XPS Material: Plastic, injection molding  
Mounting foam 750 ml
Mounting foam 750 ml
Mounting foam Contents: 750 mL Packaging: 12 pieces per box
Skip product gallery

Ähnliche Artikel

Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete. Element length - 200 cm Material strength -  10 mm Width at foot - 70 mm
Deckenrandschalung XPS 50 FZ ISO
Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Skip product gallery

Customers also viewed

Deckenrandschalung XPS 50 FZ ISO
Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Deckenrandschalung XPS 35 FZ ISO
Deckenrandschalung XPS 35 FZ ISO
Slab edge shuttering and insulation in one. 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Deckenrandschalung XPS 35 FZ ISO
Deckenrandschalung XPS 35 FZ ISO
Slab edge shuttering and insulation in one. 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Deckenrandschalung XPS 35 FZ ISO
Deckenrandschalung XPS 35 FZ ISO
Slab edge shuttering and insulation in one. 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Deckenrandschalung XPS 35 FZ ISO
Deckenrandschalung XPS 35 FZ ISO
Slab edge shuttering and insulation in one. 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Thumb nut
Thumb nut
Galvanised accomplishment suitable for tie rod Ø 12,5mm, Ø 15mm, Ø 20mm, Ø 26,5mm
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
Tubes for cut outs
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
This website uses cookies to ensure the best experience possible. More information...