Go to homepage
Catalogue
Wishlist
Request Basket
Skip image gallery

Deckenrandschalung HB mit PVC Anbindungsprofil

Product number: 83R30131

Available on request

Deckenstärke in cm

Price on request

m
m

Description

Type:

  • 16
  • 18
  • 20
  • 22
  • 25
  • 30
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Deckenstärke in cm
Price
Action
83R30131
 Deckenrandschalung HB mit PVC Anbindungsprofil
18 cm
83R30132
 Deckenrandschalung HB mit PVC Anbindungsprofil
20 cm
83R301324
 Deckenrandschalung HB mit PVC Anbindungsprofil
24 cm
83R30133
 Deckenrandschalung HB mit PVC Anbindungsprofil
22 cm
83R30134
 Deckenrandschalung HB mit PVC Anbindungsprofil
25 cm
83R30135
 Deckenrandschalung HB mit PVC Anbindungsprofil
30 cm
Skip product gallery

Customers also viewed

Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete. Element length - 200 cm Material strength -  10 mm Width at foot - 70 mm
VIBA - shuttering board HB
VIBA - shuttering board HB
Material: Wood concrete slab Element - Length: 1600 mm, other lengths on requestMaterial - Thickness: 10 or 14 mm Advantages: lost formwork doesn't have to be removed from the concrete easy mounting through screws or nails (light nailing) Time saving  Optimum connection with concrete through 7 fixing strips by an element length of 1600 mm Fixing strips is made of the same material as VIBA shuttering board
Deckenrandschalung XPS 50 FZ ISO
Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Baustütze - Mini (DC)
Baustütze - Mini (DC)
With covered thread (DC). Headplate: 120 x 120 x 5 mm, with borehol ø 40 mm G-hook: Ø 12 mm (no loosing) with bearing ring (loose) Failure loads tested at concentric load, pay attention to security factor!
VIBA Plex F Formwork Board 10
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m² Advantages: low dead weight of the plate assembly possible without crane and other aids prefabricated foundations with low installation time environmentally friendly, not hazardous to water, material recycling possible single or strip foundations can be made easily without additional tools no abherent required dimensionally stable  
Deckenrandschalung XPS 35 FZ ISO
Deckenrandschalung XPS 35 FZ ISO
Slab edge shuttering and insulation in one. 35 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete
Stop end formwork made of woodconcrete. Element length - 200 cm Material strength -  10 mm Width at foot - 70 mm
Deckenstützen Euro (DC) nach EN 1065
Deckenstützen Euro (DC) nach EN 1065
All versions with failure protection, accident proof. Props in different sizes and versions.Failure loads tested according to EN 1065. Produced and tested according to EN 1065, with covered thread (DC). With failure protection and accident proof. Threaded socket with additional bearing ring (slide ring). Headplate: class A 120 x 120 x 8 mm, with borehole Ø 40 mm G-hook: Ø 14 mm (no loosing) with bearing ring.
Installationsbloc "Prottelith"
Installationsbloc "Prottelith"
Product properties: non-flammable passable  insensitive to moisture frost-resistent easy perforation of openings Bulk density: 300 kg m³, +- 5% Compressive strength: 240 kPa (10% compression) Baustoffklasse: A2, s1, dO(ÖNORM EN 13501-1)
Tubes for cut outs
Tubes for cut outs
Material: Steel blank, optional steel galv. Special materials on request. Standardlength 3 m, other lengths on request. Length tolerence for fixed lengths in mm: to DN 250 +/- 5m  
This website uses cookies to ensure the best experience possible. More information...