Building needs

Available in the following versions: Stainless steel. galvanized Further dimensions on request.

The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.

Type 2: Reusable profile strip. When stripping the formwork, the rail comes out with the formwork.

Formwork spacer tube "made of one piece" with two sealing plugs. Secure the wall thickness reliably! Material: HDPE

Chamfer strip made of impact-resistant material to breack edges and also as decoration by extensive exposed-concrete parts. Fixing at an interval of 10-15 cm with nail holes.

Sylomer impact sound bearing SR 450 Area of application Pressure load Deformation Form factor dependent, the specified values apply to form factor q = 3 Static area of application (static loads) up to 0,45 N/mm² approx. 10 % Dynamic area...

Tube outside roughened. (Asbestos-free) Lenght 1,25m

for every annular seal with a sealing width of 40 mm

The P-Cable Basic HRD annular seal is available in various designs. The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Steel quality: Stainless steel Other lenghts and dimensions on request!

Steel quality: S 235 JR (ST37) Surface galvanized Other lengths and dimensions on request

Cross clamps for flat grounding straps in various dimensions and designs