Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Ausführung
weight
Price
Action
65BN
Kleber für Faserbetonrohre
Standard
1000 g
65BN2
Kleber für Faserbetonrohre
Trinkwasserbereich
750 g
Skip product gallery

Customers also viewed

RiveStop Ø 27 mm x 50 mm PS
RiveStop PS mit Kunststoff Abdeckscheibe und Edelstahl Nietdorn. Für Tiefbau, Garagen, Tunnel. Druckwasserdicht bis 5 bar. Zertifiziert durch APPLUS. Zum Abdichten mit direktem Kontakt mit Wasser und ständige drückendem Wasser wird empfohlen RiveStop mit Edelstahl Niete (PS) zu verwenden. SCHRITT 1: Führen Sie RiveStop in die abzudichtende Öffnung ein. SCHRITT 2: Entfernen Sie den Nietdorn. Die Niete dehnt sich aus, bis die Öffnung hermetisch versiegelt ist.
RiveStop Ø 17 mm x 48 mm PS
RiveStop PS mit Kunststoff Abdeckscheibe und Edelstahl Nietdorn. Für Tiefbau, Garagen, Tunnel. Druckwasserdicht bis 5 bar. Zertifiziert durch APPLUS. Zum Abdichten mit direktem Kontakt mit Wasser und ständige drückendem Wasser wird empfohlen RiveStop mit Edelstahl Niete (PS) zu verwenden. SCHRITT 1: Führen Sie RiveStop in die abzudichtende Öffnung ein. SCHRITT 2: Entfernen Sie den Nietdorn. Die Niete dehnt sich aus, bis die Öffnung hermetisch versiegelt ist.
RiveStop Ø 24 mm x 50 mm PS intern-Einschub
RiveStop PS mit Kunststoff Abdeckscheibe und Edelstahl Nietdorn. Für Tiefbau, Garagen, Tunnel. Druckwasserdicht bis 5 bar. Zertifiziert durch APPLUS. Zum Abdichten mit direktem Kontakt mit Wasser und ständige drückendem Wasser wird empfohlen RiveStop mit Edelstahl Niete (PS) zu verwenden. SCHRITT 1: Führen Sie RiveStop in die abzudichtende Öffnung ein. SCHRITT 2: Entfernen Sie den Nietdorn. Die Niete dehnt sich aus, bis die Öffnung hermetisch versiegelt ist.
RiveStop Ø 21 mm x 48 mm PS
RiveStop PS mit Kunststoff Abdeckscheibe und Edelstahl Nietdorn. Für Tiefbau, Garagen, Tunnel. Druckwasserdicht bis 5 bar. Zertifiziert durch APPLUS. Zum Abdichten mit direktem Kontakt mit Wasser und ständige drückendem Wasser wird empfohlen RiveStop mit Edelstahl Niete (PS) zu verwenden. SCHRITT 1: Führen Sie RiveStop in die abzudichtende Öffnung ein. SCHRITT 2: Entfernen Sie den Nietdorn. Die Niete dehnt sich aus, bis die Öffnung hermetisch versiegelt ist.
Kleber für Faserbetonrohre
Two component-special adhesive for water-proof bonding (incl. Hardener). Consumption for 1000 plugs 2 cm length: Ø 22 mm - ca. 3 kg Ø 27 mm - ca. 4 kg Ø 32 mm - ca. 5 kg Ø 40 mm - ca. 7 kg 
RiveStop Ø 24 mm x 70 mm SS intern-Einschub
TYPE: Internal RiveStop SS with stainless steel cover plate and stainless steel rivet mandrel. Ideal for exposed concrete walls in combination with the stainless steel cover. Water pressure tight up to 5 bar. Certified by APPLUS. It is recommended to use RiveStop with stainless steel rivets (SS) for sealing with direct water contact and constant pressing water. STEP 1: Insert RiveStop into the opening to be sealed. STEP 2: Remove the mandrel. The rivet will expand until the opening is hermetically sealed.
Protective mats Super (frost protection)
The protective mats SUPER is bothsided coated with a white layer (Summer side) and a black layer (Winter side) Scope of application: Frost protection for Winter (enables concrete work to -5 Degree C without hardness decrease) Evaporation protection Protective covering Heat insulation
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
Flächenabstandhalter Faserbeton - T-Profil
Rod spacer made of fibre reinforced concrete.Manufactoring length 100 cm. Also available in different lenghts (e.g. 18, 25 and 33).
Druckkonus lang PVC frei
Cones made of plastic, suitable for tube struts with a inner diameter of 22 mm respectively 26 mm. The remaining conical openings, after removing the pressure cones, are sealed with conrecte cones 40/5 and sealing adhesive. Pressure cones are reuseable.