Skip to main content Skip to search Skip to main navigation
Filter products
Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.
Product
Länge in mm
Price
Action
65CAW
Wave anchors
550 mm
65CAW1
Wave anchors
670 mm
65CAW20
Wave anchors
Skip product gallery

Ähnliche Artikel

Ankerstab Ø 15,0 mm (90 kN) schwarz
Hot-rolled steel. Self-cleaning D&W Twin-rib threaded steel. Standard length: 6m Other lengths on request
Skip product gallery

Customers also viewed

Wave anchors
Wave anchor to anchore single-sided system to the floor, to mount formwork element,  A-frames, scaffolding bracket, etc.
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
Exposed concrete plugs for pressure cone
The high-quality exposed concrete cones are bonded, with contact adhesive X1, in the remaining opening after removing the pressure cones. Apply the contact adhesive on the backside to obtain a clean visible area.  
Pressure cone standard (PVC-free)
The pressure cones are attached to the spacer tube. After concreting, the pressure cones are removed from the concrete and can be reused.
External sealing ActiveRing
The ActiveRing mini and maxi allow a safe and lasting sealing for fibre conrete- and plastic tubes. Easy and safe Sealing test MFPA Leipzig Good chemical resistance´ Waterproofing up to 8 bar  
Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Kleber für Faserbetonrohre
Two component-special adhesive for water-proof bonding (incl. Hardener). Consumption for 1000 plugs 2 cm length: Ø 22 mm - ca. 3 kg Ø 27 mm - ca. 4 kg Ø 32 mm - ca. 5 kg Ø 40 mm - ca. 7 kg 
Deckenrandschalung XPS 50 FZ ISO
Slab edge shuttering and insulation in one. 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.
Faulenzer (special props)
Perpendicular and angle setting Infinite adjustment with integrated spring base part Can be clamped between ground and ceiling Adjustment of the levels possible in varaible heights by sliding eyelets With synthetic cap on the upper end From profiled pipe inside 35 x 35, outer 40 x 40 mm
Flachdichtung selbstklebend
Self-adhesive sealing rings made of foam rubber. In exposed concrete structures, the sealing rings are inserted between the pressure cone and the formlining to prevent water from separating out of the concrete. By that, a perfect concrete surface is achieved.