Properties

Engine:	Honda GX 160, Benzin
Fuel supply:	Benzin
Gewicht / Stk:	105 kg

Vibrating plate VD - 20P 105 kg

Product number: 56IC20P

Stk

Description

Application information:

Dimensions of the base plate width x length: 500 x 565 mm

Frequency: 100 Hz

Centrifugal force: 20 kN

Maximum working speed: 25 m / min

Max. Power / speed: 3.6 KW / 3600 rpm

Engine:	Honda GX 160, Benzin
Fuel supply:	Benzin
Gewicht / Stk:	105 kg

Customers also viewed

Vibrating plate VD 15P 85 kg

Masonry tie channels Type HMS 25/15-D galv.

To fixtate outgoing masonry walls on concrete. The brick tie anchors can be used at any desired position across the total length of the brick tie channel.

Fixing clip Ø 3 mm

Fixing clip Ø 2 mm for VIBA-Flexto fix the element joints.

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

VIBA-joint sheet roll ACTIVE - 160 mm unilaterally coated with Bentonit

VIBA thick tin Active is a galvanised, unilaterally full-flatly with active Bentonitcoated sealing metal with source effect. In both forking out a 7,5 cm wide high sticking push connection is raised. incl. 20 connection hangers, 4 push clips + 1,5 m of push connection (self-adhesive)

Spacer Twistex PVC-free

Load-bearing construction, also suitable for heavy reinforcement. Shorter length than conventional bottom bar! Flexible and efficient installation thanks to a length of 80 cm. Can also be used upside down on soft surfaces. Test certificate on request.

Stone cutting machine STEINADLER mod. SR 1000 H

The machine SR 1000 is a robust stone cutting machine for wet cutting. Provided with a diamond dividing disc it is used for cutting bricks, Ytong, concrete, lime sand brick, clinker and similar material. Robust, powerful and longliving due to its very stable construction. Technical data: engine: 7,5 kW 400 V 50 HZ<?xml:namespace prefix = "o" /> water pump: TB 16 0.07 kW 400 V 50 HZ dividing disc: Ø 900 or 1000 mm Bo 60 mm cut depth: max. 365/420 mm cut height: 650 mm feed: automatic with handrail Dimension: overall length 1150 mm overall width 860 mm overall height 2000 mm weight 415 kg

Formwork oil Prägnit ST300

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary. Degredable for 81% within 21 days.

Construction water bar inside

Vitzthum-water bars made of soft PVC bribe through many good features and high profitability. The water bars are resistant against acid, alkali and putrefaction. Variety overview: Typ a b c f 61A080 80 - - - 61A100 100 40 3,0 10 61A120 120 45 3,0 10 61A200 200 70 3,0 15 61A250 240 80 3,5 15 61A300 320 110 4,5 15 Bitumen-resistant variety on request!

Protection cap VIBAProtect H

Comply with the requirements for covering vertical reinforcement bars in accordance with § 6 (4) BauV. The protective cap is made of special plastic and it is made in one piece. The cap has a steel insert for optimal safety. The hourglass-shaped body minimizes wear and tear and ensures optimal grip on the iron. The head is optimized for the Austrian market. Therefore, it can also be attached without any problem even when the iron gaps are smaller . Advantages: Narrow head for small iron gaps Reusable Weatherproof PVC - free