Products from Unbekannter Hersteller

Annular seal Basic 1 made of stainless steel, V2A (material no.1.4301) Seal width 20 mm for non-pressing water up to 1.5 bar completely gastight and watertight built-in torque control EPDM rubber insert DIVIDING THE RING SEAL BASIC 1 To...

Bearing made of plastic to absorb moving forces of VIBA shear force dowel. The quill zone allows a longitudinal movement up to 20 mm. In the colours: yellow gray green blue black available.

The P-Cable Basic HRD annular seal is available in various designs. The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

The P-Cable Basic HRD annular seal is available in various designs. The following product identification is used: SG x (number of holes) / y-z (area in which the hole can be adjusted)

Steel quality: S 235 JR (ST37) Surface galvanized Other lengths and dimensions on request

Product description: The neutral silicone is a one-component oxime-linking silicone sealant for expansion joints in the construction sector. After use, the silicone hardens with humidity to form an elastic sealant. Field of use:...

Tested formwork oil suitable for all formworks. Good degradable with certificate Mixture of mineral oil and plant-based oil Apply a thin layer for best effect with protection of the formwork. No cleaning of the formwork neccessary....

PVC- free spacers for vertical reinforcement.

Made of fibre concrete for horizontal and vertical reinforcement.

Hot-rolled steel. Self-cleaning D&W Twin rib threaded steel. other lengths on request

Slab edge shuttering and insulation in one . 50 mm extruded polystyrene. Foot is made of 4mm fibre cement (Width 10 cm) Elements with tongue and groove. Standard in 1 or 2 metre elements, other lengths on request.

Stop end formwork made of woodconcrete. Element length - 200 cm Material strength - 10 mm Width at foot - 70 mm