Storagecontainer 4,0 m galv.
Product number:
36M044
Description
Container with sidewise double-door (Width 200 cm) at the longitudinal side.
Length: 4m
Width: 2,2m
Height: 2,2 m
Skip product gallery
Customers also viewed
Storagecontainer
The container is equipped with a double door with handle and lock at the front side.
Whole container can be disassembled and be easíly transported.
The assembled container can be easily transported with crane and lift trucks.
For the purpose of crane transportation the container has crane holders at the edges.
Storagecontainer
The container is equipped with a double door with handle and lock at the front side.
Whole container can be disassembled and be easíly transported.
The assembled container can be easily transported with crane and lift trucks.
For the purpose of crane transportation the container has crane holders at the edges.
Storagecontainer
The container is equipped with a double door with handle and lock at the front side.
Whole container can be disassembled and be easíly transported.
The assembled container can be easily transported with crane and lift trucks.
For the purpose of crane transportation the container has crane holders at the edges.
Raumcontainer CAMP
Equipment:
Standard exterior paint frame and walls are gray/whiteAußenlackierung Rahmen und Wände grau/weiß
Standard PVC-floor covering
Exterior door: 1000 x 2226 mm (External dimension)
Tilt and turn windows: 1000 x 1250 mm insulation glazing with PVC-shutter
Ventilation grills
Walls and roof isolated
Internal heigth 2260 mm (other heigths on request, as.Example. 2300 mm)
With 4 crane hooks
Electrical installation: 380 / 200 Volt
1 Protection cap
Input and Output 380 V / 16 Ampere
2 Circuit breaker (by length 5 6 Meter 3 Stück)
1 Light switcher
1 socket Schuko 10 / 16 Ampere (by length 5 and 6 metres 2 pieces)
VIBA Plex F Formwork Board 10
The board is a universal usable and cost-effective shuttering for single and strip foundations. The structure of the board allows the absorption of a lot of pressure and by cutting in one side of the baord, it can be easily bent around corners. Board size: 5.04 m²
Advantages:
low dead weight of the plate
assembly possible without crane and other aids
prefabricated foundations with low installation time
environmentally friendly, not hazardous to water, material recycling possible
single or strip foundations can be made easily without additional tools
no abherent required
dimensionally stable
Log in to see more information
Plywood panels SMOOTH
The both sided coat gives these panels high resistance against weather, liquids, etc.
Structure: cross-banded construction
Gluing: cook and weather-resistant
Surface: phenolic coating
edge sealed
other forms and thicknesses on request
VIBA Sinterflex waterstop sheet
Our VIBA Sinterflex waterstop sheet is coated on both sides with a patented “active” special coating. This coating is non-sticky and does not require any protective film to be removed before concreting. The coating bonds with the concrete through a natural reaction with the surrounding concrete, thereby actively sealing the joint to be waterproofed. The joint is actively sintered by the special coating and therefore becomes increasingly dense over time. This process is referred to as active sintering or active mineralizing deep sealing. The unique bond between the active VIBA Sinterflex special coating and fresh concrete reliably prevents water from migrating around the VIBA Sinterflex waterstop system. For secure sealing, a concrete embedment of only 3 cm is sufficient. VIBA Sinterflex is water-reactive and therefore actively seals construction joints and designed crack joints through a natural concrete-technology process.
Water pressures up to and including 5 bar = 50 m water column can be safely sealed.
Log in to see more information
Lagercontainer lackiert
Construction with wood or steel-concrete.
Article-Nr.
Base
36M08025
8
36M0803
10
36M08031
15
36M0806
20
VIBA-Flex Joint sheet without feet
Joint tape for more stability light angle.The sealing plate is made of galvanised steel and has polymer bitumen coating on both sides (Adhesive coating).
Log in to see more information
Strukturmatten / Matrizen für Betonwand
Textured formliners from Schalbau Vitzthum in various designs for your exposed concrete wall. The mats can be attached to the formwork either with glue or nails.
Processing instructions in the download tab.
Tolerance range length and width +/- 2.0 mm