Properties

Ausführung:	lackiert

Shifting spindle

Product number: 39GL80

Ausführung

lackiert

Stk

Description

The shifting spindle for smaller unevenness.
max. height adjustment 0 - 50 cm
in lacquered or of galvanized version available!

Properties

Ausführung:	lackiert

Variants

With the help of our variant list you can find your article faster and easier.

Product Nr.	Product	Ausführung
39GL80	Shifting spindle	lackiert

Product Nr. : 39GL80

Shifting spindle

Price

Ausführung: lackiert

In Stock

Available, delivery time: 1-3 days

Customers also viewed

Betonklötze 20 mm, Vierbein

Gießbetonabstandhalter mit vier Füße. Geeignet für starke Belastung und Sichtbeton durch die schmalle Auflageflächen. Der Abstandhalter hat einen Ösendraht zur Befestigung.

Betonklötze 30 mm, Vierbein

Gießbetonabstandhalter mit vier Füße. Geeignet für starke Belastung und Sichtbeton durch die schmalle Auflageflächen. Der Abstandhalter hat einen Ösendraht zur Befestigung.

Synthetic rubble pipes with 2 chains

Fast assembly = high profitability!! The rubble tubes are used for the removal by debris of each type.The tubes are from tearproof synthetic material, noiselessly and very long-living. Chains diameter 7 mms with security snap hook.

Shifting frame lacquered

Shifting fram made of tube 48 x 2,3 mm The shifting frame for extremely high steps (e.g. stairwells) All variants in lacquered or of galvanized version available!

Band saw UVB Z 500 S

Save time and effort at the building: with the band saw UVB Z 500 S for cutting gas-aereated concrete blocks and expanded clay - easy, quick and precise. The quick pay-back time makes it a profitable investment! Advantages: Torsionally rigid body. Practical transport position. Precise saw blade guidance. Saw table made of aluminium. Vulcanised rubber lining. Automatic limit stop. Quick changing of saw blade (also suitable for wood). On request with optional dust vacuum.

Faulenzer (special props)

Perpendicular and angle setting Infinite adjustment with integrated spring base part Can be clamped between ground and ceiling Adjustment of the levels possible in varaible heights by sliding eyelets With synthetic cap on the upper end From profiled pipe inside 35 x 35, outer 40 x 40 mm

Contact adhesive CEM 805 for swelling waterstop and joint sealing strip

CEM805 is a one-component, neutral-odor sealing and bonding compound based on MS hybrid polymer technology. It is solvent-free, silicone-free and isocyanate-free, cures neutrally, is paint-compatible, weather-resistant and offers good chemical resistance. Applications:Contact adhesive CEM805 is used as a system sealant and installation adhesive for hydrophilic waterstops, joint sealing sheets and concrete plugs. Typical applications include: Sealing and bonding in concrete construction for interior and exterior use Tested for watertightness up to 5.0 bar hydrostatic water pressure (= 50 m water column) in the DualProof System (PVC-P), at product transitions and on concrete surfaces Crack-bridging up to 2.50 mm down to -35°C (crack-bridging class A5) Crack-bridging sealant up to 50 m water column Suitable for use on plaster, gypsum, ceramic, glass, wood, metal and various plastic substrates, as well as galvanized steel and aluminum Well suited for bonding construction foils and membranes Suitable for sealing and bonding applications requiring silicone-free systems on site Butt joint bonding of SilverSeal using CEM805 has been tested and proven watertight up to 2.5 bar (= 25 m water column) Hydrophilic joint tapes (Art. No. 61L) and swelling rubber profiles can be installed in a backflow-proof manner with CEM805 in accordance with German general building authority approval (abP) Also suitable for use with fresh concrete bonded waterproofing systems and joint sealing metal sheets. Note: Do not apply on substrates such as bitumen, tar or coatings that may cause incompatibilities and plasticizer migration. Standards and certification CEM805 contact adhesive is tested as a sealant in accordance with EN 15651-1 and certified as EC1Plus according to EMICODE. Product features and advantages: Ready-to-use MS polymer installation adhesive and sealant, free of silicone, isocyanates and solvents, with a broad adhesion spectrum Elastic Non-corrosive Neutral odor Weathering and aging resistant Good UV resistance Virtually no shrinkage No bubble formation Paint-compatible

Foundation anchor glav, height 90 cm

Simple support for the base plate stripping Because of its expanded earth spike also applicable for soft grounds.

VIBA mandrel sleeve

Bearing made of plastic to absorb moving forces of VIBA shear force dowel. The quill zone allows a longitudinal movement up to 20 mm. In the colours: yellow gray green blue black available.

Bricklayer's platform compact galvanized 1.5 t

Technical specifications: Load capacity: 500 kg / m², max. 1500 kg Extracts max. 125 kg Attachment max. 300 kg Platform height: stepless from 0.46 - 1.80 meters without wheelset Platform size: width 1.20 m length 2.19 - 3.49 m Transport dimensions: 2.19 x 1.26 x 0.46 m Weight: 498 kg Electrical connection: 1 device plug 230V 16A feed